Search results

Neither, look at somethng better than a Big Box brand.. r

Move, that's my plan anyway, r

You might try KROIL, best penetrating oil you will find, it loosens stuff I thought never would come apart. Remember, use sparingly, the part that runs on the floor does not work...r

https://procheminc.com/products/no-seize/

I vote Cub Cadet XT3

Gentlemen, I know there are plenty FR series units in service that could benefit from this item>...

Here's a list of filters that will work, WIX 57035 32 micron (2.3 tall) WIX 51056 21 micron (2.7 tall) 51348 (3.4 tall) WIX 57148 5 micron (3.4 tall) PH8170 I for one prefer the WIX 57148, Cheers, Ray

Here's a list of filters that will work, WIX 57035 32 micron (2.3 tall) WIX 51056 21 micron (2.7 tall) 51348 (3.4 tall) WIX 57148 5 micron (3.4 tall) PH8170 I for one use the WIX 57148, much better than the OEM filters, Cheers, Ray

If it is a older machine don't forget the frame end of the negative cable....

I would just add, think about the maintenance that goes with a ZTR. Might consider a deck that raises so deck service, blade sharpening are easier or you'll need a jack or you'll either have it picked up or be able to haul it yourself. My yard is 1.5 acre, cut it for years with a 38" rider...

Tell us about a Ferris, I see it has rear swing arm suppension? I would like to see a diagram of this arrangement. I read it has greasable spindals, I don't see this a plus. On my BobCat CRZ that would be hard to reach. Cheers, Ray

The Lion Rocks !!!! Welcome

Looks like allot of money for a Briggs & Stratton engine?

Please do not, it kills folks cats and unsuspecting bird life, see my update further down..r

Hands down the easiest way to rid of on your property is a 5 gallon bucket with a flip trap lid, little peanut butter and couple inches of water. No poison needed. Simple google will find these available. I make my own with old campain signs, no more mices... this works better than a...

Let's not, all that does is poison someone's cat or an unsupecting bird. Much easier way to get rid of mice.r

Sir, check your oil, I've had a LT1018 for years, the only time it did not start the carb had failed and the cran k case was full of gasoline. It acted just as your video showed. r

Understand, the Hustler hubs I found running 20x12.00-10 uses a 10x8.5 rim with 3.12" backset, The Bobcat info is confusing because on the chart it shows 10x7 rim but it you look close. Go here https://www.m-and-d.com/solr/words/4168348.html I believe it shows there is an error on my original...

Bert, look at Hustler Raptor HD is 20x12.00-10 . rim is 10x8.5 , want a bet a 20"Hustler rim will fit a 20" Bobcat? , are they not both driven by ZT 2800 hydro units 48, 50, & 60 BigDog Aplha MP 20x12-10 ZT2800's 54" & 60"...

After digging through this info, it is clear the 20x12.00-10 tire uses a 10x8.5 rim, there is a print error in my parts listing.. Oh Well. r

With a Happy New Years to go with it Sir, Cheers, Ray

Gentlemen, here's what I'm researching, my machine (2019 CRZ 48") it came in 42", 48", 52" and 61". Judging from the part#'s I could go up from 20x10.00-10 to 20x12.00-10 on the same rims., It looks to me the rims are simply 10x7 on the 48 to 61" decks and the frames are the same item except...

After the great lesson on belts, where do you buy your tires? Cheers, Ray

Bert, thanks, one could easily give up trying to match up bett sizes, interchange works well, r

Anyone every changed a twin arm control over to Joy Stick? I'm just curious how much hardware it would require?..Something tell me it would be costly. Cheers,. Ray

Thank you Sir

If it works for you go with it, Kohler, Kawasaki or B&S don't make oil nor does BobCat make Belts. Cheers, Ray

Thank you Sir, I found it for the blade belt, Part #: 6692BR Line: GAT B 21/32" x 148 3/8" , Cheers, Ray

Gentlemen, I believe I have identified the size of PN# 4169566 - BELT-48" CUTTERDECK → B 5/8"Width - 148.35" Length What I seek is the same info for PN# 4168621 BELT-TRANSAXL Ya know, when the sucker cost $100+ you would like it to fit. Thanks for the info..r

Sir, thanks for the reply, FYI, neither of the BOBCAT part#'s cross on either of these sites..

Anyone got a Brand they would recommendation for ZTR mower belts? Anyone know what manufacture provides BOBCAT OEM belts?

Notasha, I'm about 30 miles South of Atlanta, here's a few of my favorites that do well in this part of the country. Crepe Myrtle Limelight Hydrangea TigerLilies Daylilies At one time there were over 500 varities of these in my yard. Sweet Shurbs are a native favorite (these...

Here's an informative read on AGM batteries, it indicates you'll might need a new charger. Cheers, Ray https://www.thedrive.com/cars-101/36405/what-is-an-agm-battery

Buddy, yes, an I'll leave this alone until it's out of warranty, Cheers, Ray

I cut my yard in less than an hour, the filter on this Kiawasaki engine would be in worse shape after one cutting than half a season on my old Cub Cadet tractor. No way I was going to watch it destroy my engine in the factory configuration. The rubber elbow you speak of is an absolute joke even...

Your don't actualy click the avatar, you simply hover over..

Gentlemen, I ditched the wood box for a 12x12x4 electrical box, a screen intake cover, some bracing and paint. Small hole on the back allows for access to the filter clamp. No grass to cut now but it worked well sweeping/mulching the leaves. I find it very interesting the new FT model...

Going to look into this one> https://derale.com/product-footer/filtration/engine2013-10-28-09-53-27459934969/sandwich-adapters/engine-oil-filter-relocation-kit-1-2-npt-ports-detail Cheers

Anyone familiar with an add on oil cooler for a FR651V?

I would add BobCat to this list...

I'm not knocking Simplicity but I would say do a lot of research about what engine is available to you on the machine no matter what Brand you purchase, it's the most expensive part of the unit..

make sure your muffler is not clogged, swap the plug and check to make sure the plug wire makes good connection, could be tarnished/corroided.

I glad my units have fill resserviors on top, I feel sure keeping them full make for happier units and it certainly makes for easier servicing.

Thank you, I can see that being useful. Cheers, Ray

Gentlemen, before I get into this, can someone tell me what size the fill plug is on a ZT-2800 ?

Thank you, good info, r

I've done way to much reading on the stats you provided and I'm still not sure what a minimum rating on 9.0 cSt or a Kv100C rating of 18 is telling me.

LA I'm all in for synthetic oil products. So what is your preference for Hydro oil?

Not if we run the STUID Democrates out of office... r