Search results

Some chainsaws are bad for not sealing like the MS361. The "lumberjack" fix is to put some grease around the egde of the filter to help sealing.

🍿

No offense but open a mower shop. Charge $50-$100 per hour to diagnose, repair and time to lookup parts. Most ICE stuff it is fairly easy to lookup parts with sites like Jack's and others. Electrix stuff not so easy. Most folks won't pay you what it costs to fix some electric stuff. If you want...

Remove motor. Apply 24v from a couple batteries. Motor does nothing. Bad motor Check voltage at mower battery terminals. No voltage. Bad battery. If motor and battery test good then most likely controller bad. Not many DC motors like stopping in a couple milliseconds. I have seen windings...

New and "improved".

I have both a couple different gap type testers and a couple of the inline neon type. They are actually used differently and they tell you differet things.

Folks who don't run a shop don't understand how much time it takes to the job properly. And guarantee the work.

The 3/8 is a Tekton. Works good compared to other ones.

Take your pick

I am not building the space shuttle. About the only thing i use a torque wrench on is head bolts, rod bolts and sump covers. I have 1/2" and 3/8" Tekton clicker wrenches that get the same readings as my old beam wrench. If i am off a little it hasn't been a problem yet. It's a lawnmower not...

Take out the spark arrestor and clean it with a propane torch.

After Taylor bought out bankrupt Standard Register which had merged with Workflow 1 they closed all tbe facilities in Dayton and laid off everybody but paper pushers and moved what's left of them to the 111 W first building in downtown Dayton. When SRC went bankrupt they wrote off millions in...

Some of the very low end handhelds use "yellow " fuel line that is not the real Tygon stuff and E10 will turn it to mush in one season.

My gas is better than your gas LOL

Had a 10 year old china ATV in for no spark. Every engine part available for it cheap. CDI module was $10. Needed a set of rear plastic wheels for a husqvarna push mower. $40 each and took a month to get them. Got 2 customers who need cams in B&S engines and cams overpriced and backordered. Got...

The one brand i can still get parts for is JD. Pricey for the cust but at least i don't spend hours chasing parts for them. The other mowers i can easily get parts for is the old AYP craftsman riders. Any part you need is on ebay. Husqvarna is the biggest PITA to get parts for. They might as...

A big issue i have is literally over half the stuff i need from stens is out of stock but if you go to ebay and put in stens and part number and numerous sellers have it for a hefty markup. I have been buying tires off amazon and belts off ebay. Getting to the point i may close just because of...

Unfortunately most shops won't work on electric mowers because there are no parts lists or parts available.

Many lawn mowers have more horsepower than the original VW bug.

My butt was too fat for me to race LOL. I just built engines for folks in southwest ohio. There was a local guy that quit building 5hp briggs to concentrate on 2 strokes as that was where the money was. I picked up a lot of his 5hp briggs business and i had access to his dyno and engine building...

I used to have a yazoo HPTOK. 20hp old kohler twin and mine had the 76" deck

What is the tune?

I have seen about a half dozen with loose crankcase bolts that causes loss of primary compression. Mech at an echo dealrt said he sees it a lot on the homeowner grade stuff.

I would pull the muffler and check piston and cylinder. Check the cylinder and crankcase bolts are tight. Loose crankcase bolts common on Echo trimmers. Check for good spark and replace plug. If still floods and hard to start then carb prob. If non OEM on it now don't bother working on it just...

Gravel and a 2 stage snow blower is always interesting. How high above the Gravel do you have the skids set? Is the gravel hard packed or loose? If the skid digs into the gravel you may need wider skids...

LOL How many more hp do you get? I used to build 5hp B&S engines for WKA stock, stock appearing and outlaw classes. I have degreed and plotted many stock and aftermarket cams and put engines on a dyno. If you can tell a power differece of a couple thousands lash on a fairly low compression 3600...

I just love this thread! All of the internet scientists 🤣🤣🤣🤣🤣 I'm not a qualified internet scientist but i did stay a a holiday inn express once. 🤭

Say what???????? I have about 15 2 strokes all running 87 regular. 2 of which are chainsaws running 195psi compression and advanced timing with ported cylinders. Why do i need 89 octane RATED gas?

I have a stihl fs80 bought in 1998. It has had over 100 tanks of fuel throught it. Worn out 3 string heads. Never had E free gas in it. Replaced a split primer bulb but nothing else about the carb. Original fuel lines and diaphragm. Runs just fine. I run all the handhelds dry at the end of the...

My ⛽️ is better than scrubs ⛽️

Clinton

I have a couple customers with bad cams on old craftsman mowers. Not worth having me put cams in them and i showed them the turn bsckwards till it hits compression and then it will crank. They think i am some kind of magician LOL

As much as i hate to admit it i have had good results with china parts on honda GX engines. Got a complete cylinder head off ebay for $44. Looks identical to the OEM. Bolted on and works perfect. I have installed like 20 honda style china carbs with no issues. Same for recoils. I have put a few...

I am sure the quality will double as well as the price for parts <sarcasm alert>

If you take the head off you can put in on a piece of glas with some high grit sandpaper like 600 and hold it flat and swirl it in a figure 8 for about 30 seconds and see if it is warped by the scratch pattern on the head. I sand heads flat if they are warped.

Underground phone cable near my house hit by the county ditch mower. Belongs to Frontier. Can't get a human being on the phone or on their chat feature. When my landline and 50 others craps out maybe they will care.

How fast does fresh oil turn black? A blown head gasket will turn oil black in a couple of hours of running.

A leakdown test would tell you more. If the head was warped the new gasket could have failed on startup. Does it start right up but blows a puff of smoke the runs fine with no smoke? A slightly blown head gasket on that engine will do that.

The head gasket is blown. Seen it blow oil out of the fuel pump a few times.

Remove the paper filter and replace it with the round red screen type. Some paper filters are not compatible with gravity systems.

The great ethanol vs non-ethanol debate rages on!!!! Just like oil, oil filters, spark plugs use what gas makes you happy. I have about 30 things with gas engines that all run regular pump gas and i have stored regular gas in cans for over a year. Never had an issue. I guess i am just luckier...

"When it stalls the only way to get it going is to disconnect the fuel filter and let gravity fill it up again." Does it have a fuel pump or is it a gravity system? Is the fuel filter the pleated paper element type?

Thanks. A very long time ago my father told me that something you have is worth what someone else will pay for it and you are worth what other people think of you. Took a while for it to sink in.

When i took it back she refused to let me eat the blown engine repair. We haggled and i said just pay for the parts and labor for the original repair and the parts for the blown engine. She said OK and then wrote the check for $50 more than that and gave me a hug. She lost her husband 8 years...

If it has the stupid automatic electric parking brake you might try unplugging and plugging in the connector to the brake control module a few times and see what happens. They are famous for corroded connections.

I have a 320 grit ball hone designed for cast iron and works well. I have used it on aluminum for a few seconds and had good results with regular rings.

If letting out the clutch kills the engine then that switch is working. Seat swith a better place to start.

It's a 4stroke. One will be impulse from the crankcase.

There was an article i read on the internet (must be true) that most of the plugs on amazon are counterfeit. I get my plugs from stens and another reputable online source. Took a plug out of a honda once that i was pretty sure was a counterfeit NGK.

I guess i am lucky. I put in close to 100 plugs a year most of which are champion. Haven't seen any failed plugs