Search results

Ok so Ive checked that out closely and its just the cog gear that is spinning not the motor shaft.Im aiming to swap it with the good cog gear tomorrow or at least take it off to see what the center of the cog gear looks like .If the end of the motor shaft is stripped -do you know if that is...

I have seen in a manual the Hydro is sealed but I changed the oil as per the instructions from the Hydro manafacturer but I've still got the same problem right arm fine left arm not.The left arm is very slow to take off and has little power -same in reverse.Ive just noticed this cog brake...

Thanks for the replies,from what i can gather,by looking and checking the manual on the Hustler Sport the hydros "the transmissions are sealed for life and don't require any scheduled service" Ill try the tracking adjustment to see if that helps

My hustler sport has been tracking slightly left.Yesterday it got worse to the point if I needed to go up hill putting the left arm forward it would just make a low whining sound and not move.The right arm is fine and it’s not as noticeable on flat ground. On flat ground if I put the left arm...

Just thought Id check ! :D

Thanks Startech, So how do i access the cylinders

I’ve got a John Deere LX 279 with a Kawasaki FD501 engine.I had trouble with the starter motor,it would click several times and then start.It gradually got worse and I replaced it.Now it turns over but won’t fire.I replaced the igniter but still won’t fire.It’s getting fuel,plenty of charge on...