Search results

I would need one with threads on both ends, the drain hose on my mower has a metal fitting as part of the hose that the drain plug screws into.

That is a great ides, I wonder if a metal radiator petcock would work?.

Thanks for all the suggestions everyone but Iwas able to get the whole hose out of the engine & put it in a vice & was able to get the plug out.

OK, update, I removed the carb pulled the float bowl off & blew out all the passages with air & cleaned out a little dirt from the bowl & made sure the float was working properly. I cut the grass on our 1 acre lot & & mower ran flawlessly. Thanks bertsmobile1 I also added the fuel shut off like...

Thanks for the info & tips I was able to finally get the whole hose out of the engine & clamp it in a vice & it was a fight but I got the plug out.

Thanks for the info.

On my DeWalt Z148 ZTR mower I am trying to change the oil because it has gas in it, & I cannot get the drain plug out of the drain hose. I tried to put 2 wrenches on the hose & the plug & the hose keeps moving & I cannot break loose the plug to drain the oil. Any ideas?

Thank you for the response. I will try what I stated & report back.

My wife got a deal that we could not refuse on a clearance ZTR mower at her work place so we purchased it. It is a 2022 model DeWalt (made by MTD) Z148 48" cut 23 hp mower. I start it up & it runs fine as long as the blades are not engaged, once the blades are engaged it randomly will start to...