Search results

I will try to get the top off tomorrow and see if I can see the problem

i have the plastic cover off. I’ll pull the flywheel today. Is the counter weight under the flywheel?

No. Only about 1/4 of the rotation

I am working on a Kohler Courage 19hp in a Cub. It won’t spin. I can move the flywheel about 1/4 to 1/3 of the way around and it stops. Not a metallic stop but a softer stop. I pulled the spark plug and piston is moving. Removed the valve cover and valves are moving, push rods not bent. Looking...

Does anyone have experience with JD RX75 rear engine mower. I am trying to find parts to repair the deck and can't find on Green Parts. Can't find on Amazon either, no surprise. I need to rebuild or replace the blade spindle and both pulleys. Any help would be appreciated with a source or proper...

Wonderful

It is filled to proper level. I have not tipped it but was not the one cutting with it when it started. I will need to smell the oil that is coming out

I have a Cub Cadet mower SRC 621 with a Kawaski FJ180V engine. It is blowing oil out the carb, so bad it is dripping. When I pull the oil filler cap it is like a smoke stack. So I must have too much crankcase pressure, but why. Any hints. Thanks, Ted

I picked up a nice Troy Bilt with the Kohler Courage 22HP engine. I have been told that this engine is prone to failing and does not have a good reputation. What have you guys experienced with this engine? It is a 2012

I picked up a JD 165 at a yard sale. It's pretty rough but I'd like to get it going. It will crank if I cross the hot lead on the started with the switched lead. It will not crank with the key. I replaced the ignition switch, as there was no key either. I have tried to look at a few wiring...

I picked up an RE130 today, model year 2013 in very nice condition. It has the mulcher cover on the deck but I don't know what blade it has. Looking for any input or advice. Looking forward to grass cutting season to see how it performs. Ted

I am considering buying a Snapper rear engine mower for use this summer. I need to lighten the load on an old Honda push mower and my old knees. What has been your experience with the hydraulic transmission? I think I'd like to have that as well as an OHV engine. I found an SR1433 that has both...

I picked up a roto tiller, Snapper model 300 with a Briggs and Stratton model 80202, type 0510-01. Any idea about what year it might be? I am planning on rebuilding the engine. Thanks, jb4249

I have an HRB215 that we have had for about 5 years. Never any problems. Today while cutting it just quit. Sounded like no fire. It restarted and ran for 2 or 3 minutes and same thing. I put my spark plug tester on it and I can see the fire stopping, and when I first try to restart no fire...

I am doing some work on a 1965 Huffy front engine rider. Model number is 4855. It had a 5HP Briggs and 2" cut. I need to see a manual or just a picture of the bottom so I can see how the clutch belt mounts. and how the clutch operates. Thanks, JB4249 Ted

What experience ha e you guys had with the Billy Goat Brush Cutter? I am looking for one to clear some brush in a wooded area at a summer house. I have been using a Kubota garden tractor but it is beating my mower deck up when I hit stumps and trees. I am thinking a walk behind will be easier to...

I have an old B&S 4 HP vert shaft engine that has been sitting a long time. The engine is a 1970 model. I am looking for a good way to clean the tank. It has sluge in the bottom, for lack of a better word. I can dip it in my carb cleaner can, 1/2 at a time. Or is there another produst I should...

I was told this was a 1956 K-Mart brand riding mower. I don't know, looks like it could be a Huffy. i am in Northern KY near Cincinnati, and Huffy's came out of Dayton. Engine looks like a 3.5 or 4HP Briggs. About 19" or 20" cut. Blade looks to be direct from the engine. haven't a S/N tag yet...

I stopped at a fellows house yesterday to look at a couple of old Wheel Horse tractors. He had a small 19" 4HP Briggs engine riding mower. HE said it was a 1956 K-Mart riding mower. I have never heard of one, Is it possible he is right? I plan on going back to get a picture. Thanks, JB4249 Ted

I have a Kubota B4200, a 12.5 HP 2 cycinder 4WD. I would like to put a bush hog on it and I saw a 4' model at Tractor Supply. My question is will my little tractor handle a 4' bush hog? IT has a wheel on it so the weight shouldn't be a big problem, but will it spin it OK? Thanks, Ted

I spotted one of these today, sitting next to a barn.. An old Homelite Yard Trac Deluxe. I was wondering if any of you all think it is worth restoring. I haven't talked price with the old guy yet but I am going to stop back there tomorrow and see what he would take for it. I am thinking it is...