Search results

Oil starved?

We need pics.

Had a mower in the shop a couple years ago the woman said when she engaged the blades it killed the engine. It had an 8 foot shepherd's hook wrapped around both spindles. Had to use my muffler cutoff tool to cut it into 4 pieces to get it out. She didn't remember hitting anything.

Son hit a piece of chain link fence while mowing with a small tractor. He found it exciting.

The news tonight said we had 11 tornadoes in the area. https://www.daytondailynews.com/local/10-tornadoes-confirmed-in-southwest-ohio-heres-what-we-know/NUKNFPS53ZF6LIQPKICVIF2EQY/

I have the harbor freight one. Don't get it. The Topdon AB101 is a good basic one. And the Topdon BT100 is my favorite one.

Correct.

The new battery testers calculate the amp capacity by measuring the internal resistance of the battery and the voltage. I have 3 different ones and they all get the same readings. They will tell you voltage, state of charge and state of health and CCA amps.

That's what I mean the ethanol absorbs water and when left in the tank for a long time it rusts the tanks.

The one place i have found where E10 is a problem is with old equipment with steel gas tanks. I work on a lot of old stuff. Before ethanol pure gas didn't attract water and rust out tanks. Ethanol gas has ruined many steel tanks. I use Red Kote to line the tanks to try and save them. The old 5hp...

https://www.ebay.com/itm/250896304183 I just use these to eliminate points.

Just my personal experience. I have kept 87 E10 gas in sealed gas cans for over a year with no problem. The 1989 motor home with 454 carb engine sat for 5 years in the barn and started and ran fine. E10 87 gas with no stabilizer or other fuel treatment. Now gets used once a year to take the...

The cable usually break from being hard to engage because the deck linkage is worn and binding. There is a kit to replace the the brake arms and cam plate...

You guys shouldn't be debunking long held beliefs. Next you are going to say things like it doesn't matter who has the best oil or oil filter. Or starting fluid doesn't blow up gas engines. 😱😱😱😱😱😱😱😱🤣

I have seen an old troy bilt (garden way) mower use 2 flat idlers and no V idler.

I have chainsaw chaps. Just in case

High octane fuels are harder to ignite BUT once ignited they burn slightly slower than lower octane rated fuels. In a 4 stroke engine running 3600 RPM the difference is negligible if even measurable. In hopped up 2 stroke chainsaws running 13000+ RPM doing max pulls in wood guys have seen a...

The burn rate difference between 87 and 92 is negligible in stock small engines. We are not doing max HP pulls on a dyno. Has anyone seen a small engine damaged from preignition?

All the saw mfgrs say to use 90+ rated fuel or it will damage the saw. I don't think so. I have serviced over a hundred customer saws run on regular 87 E10 gas. Never seen one damaged from preignition. I have 5 saws that all run on regular E10. Two of them are stihl clones a 361 and a 660. Both...

I am pretty sure that Guatemalan kid is star's. That's why he got the letter. Just say'n

Rescued from going to the dump. Front spindles and steering gear froze. Got that fixed so I thing I am going restore it and put in the town farm day parade. Have to see if I have the smallest JD tractor.

When they were in indiana UPS to me in Ohio was overnight. And yes, Ground tracking is useless.

After some research found this out. Stens has switched from UPS to FedEx. There are actually two different FedEx shippers. FedEx Ground and FedEx Express. Ground ships by trucks and can take a week or more from ship to delivery. Express uses planes and still does overnight ship to deliver. The...

Last week I had a troy bilt RZT50 that had a bad engine drive pulley. Had to take the engine off and proceeded to snap off a stud of the bearing separator trying to get it off. Heat didn't help. Wound up drilling a series of holes in a row in the pulley hub and then split it off with a chisel...

Should have all that done before lunch. 😁

Thanks. Got it running but the carb sat for years with gas in it and it is trashed. Got a chineese one coming from sleezebay. Looks like the one one it is already AM

Dang, you got a good memory. I can't remember last Tuesday.

It's on an old briggs engine on a 1956 lawn tractor. Not the original but probably 60s vintage.

Another tool the young guys probably don't have.

Got to use my point file today.

Yes. The choke is on a solenoid. As the engine cranks it will open and close every few seconds on a timer. If the engine does not start after a certain amount of cranking time it logs an over crank code. One of the reasons generators auto run once a month is to keep the regulator diaphragm...

The propane and natural gas generac generators are famous for hard starting if the valve lash is not dead on because there is not enough vacum to activate the regulator diaphragm. The 2 finger salute in the carb is the test. Seen it a few times myself. Not sure if the gas engines are that...

I change those all the time. There are kits on ebay to change to ball bearings. https://www.ebay.com/itm/123773594353 https://www.ebay.com/itm/124810180231

I recently picked up 10 of these. The stens oil is getting more expensive than name brand at the parts store. https://www.ruralking.com/providence-automotive-oil-10w30-5-quarts-pa-10305

I am so aggravated with computers, especially windows, anymore I need to double up my blood pressure meds. I have a client with 10 PCs and every time windows does an update 2 of them just deletes all the printers. I have to go in and remove the drivers, reinstall the drivers and then reinstall...

1956 Eshelman

The last church A/V install I did used a pair of 80" Sony TVs. What a PITA!!!. All they want is to send graphics from a computer. If the TV is not on wifi internet you can't get past the startup screen looking for wifi. Took half hour just to get past all the BS. New TVs are a POS.

It is a trip bucket. No hydraulics for tilt.

Guy picked it up this morning. Quite the project. Fixed non running engine, fixed the clutch, added a battery and electric start to an engine not designed for electric start, fixed the hydraulics. Link to a quick vid

Glad to see it is not just me. Guy dropped off a "crack pot" yesterday. Hot tar trailer for sealing cracks in asphalt. First time for one of those.

Been swamped for weeks now. Worse than the last couple years and stens taking a week to get parts to me plus half their catalog backordered. Arrrrrrgh.

The one to the lower left of the pivot screw

Loosen the black hex head screw

I don't care what oil I use as long as it is better than the oil Scrub uses. 😜

That's hilarious. Hmmmmm...... Maybe.......

Nice but I was looking for a mulcher

During the totality I could see Venus and I think Mars but Jupiter and Saturn were too low on the horizon.

Since they are vintage I'm holding out.

It was perfect weather here and had a total eclipse. Pretty cool. I got a pair of eclipse glasses for sale now. 🤣🤣🤣🤣

We are supposed to get 90% here. Got the glasses and they are darker than a number 13 welding lens