Search results

Results 1 to 50 of 500
  1. G

    Oil change mess, suggestions?

    Kohler engines have not been manufactured for over a Decade I was told. Fashion a path out of heavy aluminium foil to help drain the oil to a container. Cut the bottom off a plastic bottle of similar size and put it over the filter after loosening it.
  2. G

    Is it better to run out of gas periodically vs topping off the tank before each use?

    Ethanol Free gas is not available in Canada thanks to Trudoo and his Lieberals. The cheap fuel now has 15% (e15) ETHAOL. oK for late model vehicles but not for small gas engines.
  3. G

    Is it better to run out of gas periodically vs topping off the tank before each use?

    The water in the tank comes from condensation in the fuel container and the Ethanol process. I never totally empty the fuel container, always shut off fuel and run engines dry and drain Float Bowl for Winter. That Ethanol (now 15%) can really seize up a Needle valve. Everyone has a different...
  4. G

    B&S 303777 wont run after new rings

    Try using some quick Start. It seems you are over your head in this. Check that the valves are set correctly and that the Flywheel key is in place. Clean Spark plugs.
  5. G

    "Backyarders" and where to buy used equipment

    What is OPE? Other Peoples Equipment?
  6. G

    Uneven Grass Height with JD srx75

    Air up the tires to equal pressure Front and Rear. Park on a Level surface and use a 2x3 or 4 and level the deck , a 1/8" lower on front. Check both sides. Mow your lawn on an angle the next time.. Check all blades for equal sharpness.
  7. G

    Would this be worth getting fixed?

    Since it has been very poorly maintained, not likely. Expensive repairs - $500 + to fix Oil leak, sharpen blades, check belts etc. Get Compression checked FIRST if going the repair route.
  8. G

    Oil filter question please help!

    It seems many oil Filters are built in India. Fram does not have a good name in Filters. I believe that Companies like John Deere have certain Specifications that filters must meet. Who knows if this is ever checked or not (Micron size that passes). Use the largest size possible Dealer...
  9. G

    Frustrated with a Cub LT 1018 No Start problem

    Have you bypassed the Safety Switches? You have done everything else except replace coils
  10. G

    Propane conversion for my Storm Responder 5500-watt generator

    You have it well in hand it seems. Backup for Backup. The switchover works well but the Propane adjustment should be constant with no adjustment required. Propane has Less BTU energy than Gasoline. Burn temps are within 35°F of each other in the 3,450 F range. What IS damaging is using E-15...
  11. G

    Propane conversion for my Storm Responder 5500-watt generator

    Are you considering using Gasoline AND Propane on the same unit? Different Carburation is involved. Propane does NOT damage Pistons. I use N.G. in my 14KW Generac. A 20 lb tank is quite small to be used on a Generator.
  12. G

    Do I actually need a blade balance?

    Well Said Sir. This should be the Final comment!
  13. G

    Do I actually need a blade balance?

    This is the contact info for Tarylfixesall.com [email protected]
  14. G

    E 15 Gasoliine

    Thanks for your reply. It is worse than I thought!
  15. G

    Do I actually need a blade balance?

    The Diagram for blade sharpening profile is in my J. D. Manual. I won't try to explain serrated edges to You.
  16. G

    Do I actually need a blade balance?

    Terryldactyl: Small engines. Google him. You don't get the 'balance' thing.
  17. G

    Do I actually need a blade balance?

    Do NOT engage your blades at idle. Belts are stretching.. Blades are NOT to be a knife edge but actually square, 0.050 vertical gives 2 cutting edges. This Topic should be ended now.
  18. G

    Do I actually need a blade balance?

    So the Cone is at the Other edge. 3/16" difference from centre.. Still centre of weight distrubution. It's not the Space Shuttle per "Terryl". !
  19. G

    E 15 Gasoliine

    In Hamilton Ontario Canada CENTEX is selling E 15 Gasoline. 15% Ethanol. Cheapest. According to several sources, this is not good for pre 2020 Vehicles or small engines. No anti knock sensor to ****** timing....Pre Ignition is not good for Pistons. Google it. G. Baker
  20. G

    Do I actually need a blade balance?

    Off Topic I know but a cut rate Gasoline station In Hamilton Ontario (CENTEX) is selling E 15 Fuel as it's cheapest. Not good for pre 2020 vehicles and should never be used in Small engines like Mowers etc according to Google. Preignition with no knock sensor to ****** timing. Just so you know.
  21. G

    Hr-215 I want to cut grass without engaging self propel.

    Remove the drive belt. Done. Remove side discharge plate if there is one and install a guard directing debris downward. Done.
  22. G

    Mini engine parts broke this time

    Try it and see!!!
  23. G

    Grungy gas tank

    Clean and rinse as best you can and run it. Use a Fuel Filter.
  24. G

    Briggs & Stratton 31C707 won’t start after flywheel magnet failure

    Cutting a new keyway seems best. Be sure to use the Aluminum Keys, not steel.
  25. G

    Jb weld extreme heat paste

    Weld it (NOT Braze) it first.
  26. G

    Craftsman YTS3000 Mower caught hidden rope now won't start

    It appears that the Fuel Filter is installed backwards. Big end to the Fuel pump is the norm. It makes a difference on some systems. Remove Battery connections both ends, clean and recharge battery. Good Luck. Looks like a B&S 14.5 HP.
  27. G

    Should I replace head bolts when replacing head gaskets?

    A total waste of time to clean Carbon from Pistons. You only had to remove the Valve Cover and check valves with Feeler gauges. 0.004. 0.006. Done. Original head bolts should be fine. Lightly lube and Torque per Specs.
  28. G

    Gets Hot, Shuts Down

    Since Cooling Off seems to be the key, you might try a known Good used coil or another new one. Does it have the fuel shut off solenoid below the carb? Check that wiring. Does not sound like fuel problem to me. Disconnect the multi-wire connectors at the dash/key and spray with contact...
  29. G

    Removing the fuel filter

    I feel your pain. Try using a pliers to hold the rubber line as you twist the filter.. A heat gun might help but be careful.. They make a tool for that job.Like a Reverse pliers with slotted jaws. Ask a neighbour for help. If you split the line 1/2" You can likely loosen and remove the...
  30. G

    Removing the fuel filter

  31. G

    John Deere LT 150 mower will not start

    If it does not fire with Starting Fluid, it is an Electrical problem. Most options have been mentioned. Remove covers and check that the Crankshaft/Flywheel key is not partially spun. Did you blow back into the fuel tank? That Carb shut off Valve on the bottom of the bowl should have an...
  32. G

    Tire pops off the rim

    Keeping the proper Air Pressure in the tire did the trick.
  33. G

    Tire pops off the rim

    I suspect that you have a slow leak and are running without sufficient pressure. It is rare that a Bead will break but that would cause it to fail permanently. Check your tire pressure and keep it at the Maximum.
  34. G

    90's MTD mower front wheel bearings

    Wow.
  35. G

    90's MTD mower front wheel bearings

    There is NO PROBLEM. It was designed that way. Many had Bushings. Just Drive it.
  36. G

    90's MTD mower front wheel bearings

    Some were just Oil-lite ™Bushings. These spindles look like new. Don't mess with the bearings.
  37. G

    90's MTD mower front wheel bearings

    My 1990's Snowblower is branded WHITE. Sold by Farm Equipment Dealers who sold White Tractors.in Canada. Blower made by MTD.
  38. G

    Smokes when cold and using the choke!

    Install a Fuel Shut off Valve and use it to stop the implement when finished the task. Fuel in the Oil is a huge problem. Drain Crankcase after installing Fuel Valve and change the Filters.
  39. G

    Trash picked GT3000 917.273012 w/Kohler twin and 6 speed

    Great Find. Seat and Clutch Pedal are easily available. Adapt. Great 25 HP Kohler. 46" is the Cutting width. 3 speed Forward. Get a seat and ask $975, sell for $800.
  40. G

    Tecumseh carburettor gasket kits

    Some carbs have very fine screens under the fuel elbow. Index mark them before removal.
  41. G

    electric clutch

    You may find that under the deck the belt may have damaged the Clutch wiring or it has worn through the grommet in the frame and shorts out.
  42. G

    Crafstman T110 Transaxle shaft pulls out

    There is a place in Quebec if you are in Canada that repairs Tuff Torx trannys.
Back
Top