Hammermechanicman
Lawn Addict
- Joined
- Jan 10, 2020
- Threads
- 69
- Messages
- 3,914
For the customers you don't like use permatex avaition sealant or indian head gasket shellac on both sides of a gasket.
Just say'in
Just say'in
Timecutter Valve Adjustment
- Thread starter GasSniffer
- Start date
- Joined
- Sep 7, 2024
- Threads
- 18
- Messages
- 1,612
Hi Hammer,
Do that if you plan to never have them for a customer again because they have a "buddy" that can do the work "much cheaper". LOL
Trick is a non hardening sealant. This stuff is great if YOU are the guy removing the cover next time.
For valve covers and oil pans. Use in aviation and automotive apps.
Permatex® Form-A-Gasket® No.2 Sealant, 3 OZ - Permatex®
www.permatex.com
GasSniffer
Well-Known Member
- Joined
- Jul 17, 2013
- Threads
- 31
- Messages
- 238
I heard guys say to finger tighten the RTV down and wait 24 hours before torquing it.
- Joined
- Sep 7, 2024
- Threads
- 18
- Messages
- 1,612
Hello GS,
It is a matter of reading the label on the product (with a magnifying glass) or looking it up online to understand the product you intend to use.
Way too many people rush through a repair by skipping over the needed cure time. I simply ask why rush?
It is a matter of reading the label on the product (with a magnifying glass) or looking it up online to understand the product you intend to use.
Way too many people rush through a repair by skipping over the needed cure time. I simply ask why rush?