woodstover's latest activity
-
woodstover reacted to ILENGINE's post in the thread Briggs & Stratton 8250 storm responder carb bowl held on with Phillips head screws??? with
Like.
If the carb is a Nikki or Mukuni carb they are NOT Phillips head screws they are JIS screws. Indicated by a little dot next to the X shape. -
woodstover reacted to Rivets's post in the thread Briggs & Stratton 8250 storm responder carb bowl held on with Phillips head screws??? with Like.
Three things that have bailed me out when I run into this problem with Phillips screws. 1. Make sure you have the right size driver...
-
Aluminum will still oxidize back to a duller finish.
-
Go to Parts Tree or Jack's Small Engine and use the engine family number in the top left corner of the label. Look at the base of the...
-
I just found an old online manual and it looks like they call it a valve helmet #9 and according to the picture it’s on the exhaust so I...
-
I have a neighbors harbor freight wood chipper that I am taking a look at. I took of the head and noticed a part on the ground. It...
-
woodstover reacted to tank1949's post in the thread Poulan 2375 runs only with full choke with Like.
Apparently, after shop did pressure test they didn't connect fuel lines in the proper order but told me it was not cost affective for...
-
You mentioned the fuel filter. How old is it? As a general rule if an engine requires choke to run that is an indication of too lean...
-
woodstover reacted to Pepsidrivah's post in the thread Westinghouse and Duramax generators with Like.
This would be to run the whole house for whatever length of time was necessary. Dual fuel is a good option and the electric start is a...
-
woodstover replied to the thread B&S Quantum XTS 50 - starts on ether then stops, won't start on gas.Thanks for reporting on your progress and success!
-
woodstover reacted to AcreageMowing's post in the thread B&S Quantum XTS 50 - starts on ether then stops, won't start on gas with Like.
Sorted the problem, the inlet valve did not have enough clearance on the cam - so it was open all the time. no vacuum created and so no...
-
woodstover reacted to Hammermechanicman's post in the thread Where are you guys getting your parts? with Like.
If you have a tax ID number you can get a Stens account and buy tax free. Also Stens has store on amazon. Parts are a few dollars more...
-
woodstover reacted to StarTech's post in the thread Where are you guys getting your parts? with Like.
Stihl parts are a dealer only items but you can shop around for the best local dealer. Seldom need Scag oem parts as most items or...
-
woodstover reacted to Tiger Small Engine's post in the thread Where are you guys getting your parts? with Like.
I buy parts from Amazon, EBay, and local Hardware store that is also a Scag, Bad Boy, and Stihl dealer. For me, quality of part...
-
woodstover reacted to StarTech's post in the thread Where are you guys getting your parts? with Like.
For JD parts I use mostly Green Farm Parts as they are lower than the local dealer. On top the local dealer's parts counter is too...