woodstover's latest activity
-
woodstover replied to the thread B&S model 31H7770202E1 18 HP (craftsman LT1000).Can that gear be flipped over or does it only go on one way? Just curious. -
woodstover reacted to slomo's post in the thread B&S model 31H7770202E1 18 HP (craftsman LT1000) with
Like.
Brush off the bulk. Compressed air, scrub brushes and degreaser as you like. You will see ribbed cooling fins that need cleaned. Search... -
woodstover reacted to slomo's post in the thread B&S model 31H7770202E1 18 HP (craftsman LT1000) with Like.
And clean the cooling fins and block like a new one.
-
woodstover reacted to ILENGINE's post in the thread B&S model 31H7770202E1 18 HP (craftsman LT1000) with Like.
VOM=Volt Ohm Meter aka multimeter
-
woodstover replied to the thread Kohler Command won't start.It could be your new airfilter element is not correct for venting the engine. I know the video attached applies to Kawasaki, but the...
-
woodstover reacted to austinrick's post in the thread Another B&S 550EX in a Troy-Bilt TB110 push mower with Like.
And you are correct!, it would seem. Not being 100% convinced, I ordered one of the chinese B&S knockoffs from Amaz' (instead of OEM)...
-
woodstover reacted to Chris623's post in the thread Cub Cadet just stop moving while I was mowing. with Like.
Yes, I know the shaft can't be allowed to turn. I can handle that. I have two 13" rims from my trailer that will work nicely, I think...
-
woodstover reacted to Auto Doc's's post in the thread Cub Cadet just stop moving while I was mowing. with Like.
You are correct, that is a part listing label you saw, I had to look at mine just a minute ago. The product ID label is actually on the...
-
woodstover reacted to Oddjob's post in the thread Okay, this is going to be weird. Rear-engine goes too fast. with Like.
We all make mistakes. Except me. Just kidding. We should all graciously accept that mistakes happen, make the necessary correction...
-
woodstover reacted to slomo's post in the thread Okay, this is going to be weird. Rear-engine goes too fast. with Like.
All correct. Keep the engine at roughly 3600rpm at ALL times. This is for MAX engine cooling and lubrication. For the deck it cuts and...
-
woodstover reacted to sgkent's post in the thread Briggs and Stratton Intek Plus 18.5HP How Flat does the head need to be for copper gasket? with Like.
Next time sand in an X. then flip it 90 degrees and sand in a circle, the flip it 90 more degrees and sand in an X or a +, vary the...
-
I also call them Briggs starter c clips JESUS CLIPS. When I pry it off carefully and it goes flying high and me listening for where it...
-
“Oppy” means opposed twin. People cannot get the correct parts at their local small engine shop without a model number of the mower or...
-
You can't use a metal to replace the plastic if the flywheel gear is plastic or aluminum. It will eat up the ring then you have get a...
-
https://www.staples.com/universal-screw-together-hanging-folder-frame-stainless-steel-silver-letter-27-long/product_UNV17000...