woodstover's latest activity

Since no one is willing or able to post these, here is the schematics for the Z425 with Briggs engine.

LOL, "they had locktite on the bolts from the factory but I'm not gonna put any on because I've never seen one come loose"

Get the model type and code from the Briggs engine. Sometimes those numbers can be used to narrow down and reference a few models that...

Many modern dealer techs are just there for a paycheck and waiting until and easier job comes along that does not require them to think...

From service manual Yes either oil pressure has failed or the engine operating oil pressure has dropped below 14.2 psi. I have seen...

Because they need them. One does not have to work a particular job to take advantage of a product. I mow 7 acres with a LOT of things to...

Back in 1998 i paid $350 for a commercial stihl FS80 string trimmer. I have 4 acres and have put probably a half dozen tanks of fuel...

A tired, worn engine. Keep the oil topped off every time you use it, and run it.

Most likely it has broken compression rings or a badly worn cylinder allowing too much pressure back into the crankcase. A failed...

Keep in mind that as you become exceptional proficient at something, it is hard to find people who can offer more. I belong to another...

I doubt that it is possible, as the OP must do that. Most times they don’t even post back and say thanks. They are the only ones who...

Carb needle sticking open. Clean or replace needle and seat. Please describe this testing procedure. What is fine about it? Cease...

Alright then. Replacing with a ride on is the answer. Thanks. Time to start researching which brand to buy and from where. Thanks.

If it takes you 2 hours to mow with a self-propelled mower, you should strongly consider getting another mower. Rebuilding this engine...

Sounds like you are burning a little oil. If it quickly burns off after start-up and runs strong, I wouldn’t worry about it. It’s...