slomo's latest activity

  • S
    slomo replied to the thread No start zero turn Kohler 7000.
    12.4VDC is a low charged battery. Need to run her at 3600rpm to keep the battery up. Even then a Battery tender every couple months is...
  • S
    slomo replied to the thread My new ride and question about oil.
    The more dusty the environment the more you change the oil. Needs at least yearly oil dumps. If you are a pro lawn crew much more often...
  • S
    slomo reacted to StarTech's post in the thread Briggs 31R headache... with Like Like.
    Look the fuel is fresh and I am the only one been in the carb. And yes the dang choke is fully open. Also main nozzle/jet and air bleed...
  • S
    So I was able to confirm tonight that it is a ventilation system malfunction! I disconnected the breather hose from the intake and mowed...
  • S
    Best way to remove carbon is heat. Meaning temperature heat here. Not the gimmick in a bottle to remove water in the gas tank. Just...
  • S
    slomo replied to the thread Briggs 31R headache....
    Carb float height excessive?
  • S
    slomo replied to the thread Briggs 31R headache....
    Ok so most everything mechanical sounds like it's working as normal. Dump the gas and try some fresh E-0 unleaded juice. Wonder if...
  • S
    slomo reacted to StarTech's post in the thread Briggs 31R headache... with Like Like.
    Valve lift identical on both rockers. And I will just remove the muffler after resealing the rocker cover. I have thought about that...
  • S
    slomo reacted to Oddjob's post in the thread mower hard to turn over after 6 months with Like Like.
    Sorry, spelling error. The bail is the lever that you pull back to disengage the engine brake and the grounding wire, ie: it is part of...
  • S
    slomo reacted to StarTech's post in the thread Briggs 31R headache... with Like Like.
    Of course it is a known good 2460 NGK. As far the spark the coil and plug are from my personal mower. And the flywheel holds a 10 inch...
  • S
    slomo reacted to Hammermechanicman's post in the thread Briggs 31R headache... with Like Like.
    Pull the head and check the intake is seating and sealing properly. Had one where the valve looked good but gave random backfire in the...
  • S
    slomo replied to the thread Briggs 31R headache....
    Are they resistor plugs? What is the resistance measurement through the plugs? Run some non resistor plugs. I try to cross over non...
  • S
    slomo replied to the thread Briggs 31R headache....
    Back slamming out of the carb is improper ignition timing, super lean air/fuel mix, valves out of spec or weak spark.
  • S
    slomo replied to the thread Parasitic draw.
    Just so we all know, a circuit with no amperage flow shows a drastic difference (voltage drop) compared to a loaded to the fuse rated...
  • S
    Not for nuth in' but most every push mower has one. When you let go of the dead man lever, the brake pad stops the flywheel.
Back
Top