slomo's latest activity

How about cleaning some cooling fins every year? I've heard that is a must "to do" thing on ALL mowers.

Don't know how many valve covers I've tried to remove. Globs of RTV all over the engine. End up bending and replacing the valve cover...

I agree with slomo, At the very most I will only use ultra gray very thinly on a good gasket to reseal a valve cover, but not just...

Yes sir. Head and block. All around the engine. Videos below.

I always check the oil before every mow. OK I will smell the oil for gas. come to think about it the oil doe's appear to be a tad...

Pull the top engine cover off. Use your eyes to make sure the carb linkage is working properly. About 3/4 down on the throttle, should...

Pull the upper cover and air cleaner off/ out of the way then operate the throttle to verify the choke is working freely and releasing...

Think about this one a bit. Pull the oil dip stick out. Use that thing on the front of your face. Still need help? :geek: Sorry...

A throttle cable adjustment or new throttle cable might do the trick. The throttle plate should close all the way on full choke.

air filter clean?

most likely you have a fuel or carburation problem. Check the oil too to be sure it isn't filled with gasoline that has been leaking...

Youtube is free.

I hate it when someone hijacks a thread...Start a new thread if you have a problem as it is easier to get answers as this thread is 3...

Please think, of the next guy, that has to remove that cover. Use the OEM paper/rubber gasket if at all possible. Or a sealant that...

Hire a lawn crew. You will come out much cheaper in the long run. Sit on the couch drinking a cold one watching the game......... Won't...