Skippydiesel's latest activity

I have never seen a snow blower of any kind here. But looking over the IPL I see it has an idle speed adjustment since it would after a...

You say it seems the rpms are slow but: Try manually operating the governor rod and see if it picks up rpms good with no stalling or...

Hi Rivets, According to the engine numbers this is a two stroke and an "odd bird". I think they were a collaboration build with Komatsu...

Winter

Hello H., "W" rated oils mean better flow characteristics below 32 degrees F. and improves lubrication to very cold parts. Take 10W-30...

It's a grade of viscosity, thinner in winter as not to freeze.

Range of viscosity at 32F. The 30 on the above spec is the viscosity range at 212F.

You could just work out fuel used per hour of operation. Time elapse, from start, will then give you a fairly accurate fuel...

If I put Toro Fan PN 104-2162 into Google, I get Hydro Gear PN 50848 7" 10 blade fan . Will this fit/do the job?😈

Great information - my thanks 😈

This service manual will help answer your questions. https://www.toro.com/getpub/22447

According to Toro the transmission used is a 104-1760 which translates to the hydrogear 310-0510 transaxle. Hydrogear list 79 oz of...

If it makes any difference "Tractor Data" come up with two diffrent transaxles; Hydro Gear 321-0650 & 318-0510 Anyone know for sure...

Looks like a Hydro Gear they take like Doc says 20W-50 oil.

Most hydrostatic transmissions I work with take 20W50 oil. Maybe this link will help...