Skippydiesel's latest activity

Never done an Australian survey - My subjective observation - Lawn mulching is rarely done, even collecting (harvesting) clippings not...

Came here to say the same thing. Not that I've ever even heard of a toothed "timing belt" on a mower deck that would allow for such...

Just a couple of thoughts. 1) as stated above, mow at full throttle. 2) don't cut while turning, do three point turns. 3) check deck for...

News to me!!! - For the last 50 years plus, I have understood the "drain back" prevention valve is so that oil will be available...

What is it with us humans? - We almost always prefer the costly $$$ solution to the cheap. Why purchase this single use item, in a...

Sure you not using the JD dealer here? They couldn't even find a bad spark plug and told another customer that his engine didn't have an...

"Metal was a material I tried, but found that it would not hold its form" Obviously you did not try aluminium flashing. Its designed to...

They do a FAIR job on dry grass and leaves. However, high lift or OEM blades do a much better job. Remember, mower companies designed...

One more thing, Gator blades make for a horrible cut. If your grass is just a little damp, they will pack the deck with clippings. This...

go mow your yard/lawn and take a good photo showing the mohawking so we can see for ourselves

Some just don't get it that there is only a 1/16 overlap if 72" true cutting width which means the OP has to have prefect blades. Either...

if the blades are not level that can cause air flow disruption and weird cutting issues - Google can be your friend too..... A "lawn...

if the pressures are way out of range from one another then the deck can't be level....

The tire pressures must be set before making leveling adjustments to the deck.

Well that would leave no overlap; unless, BB is lying about the cut width as 3 x 24" is exactly 72". I have yet to see a mower with no...