Recent content by seagiant

Hi, Well, took the Blower to my Buddy that owns his own Lawn Mower Shop. He told me the problem was a scored Cylinder/Piston which I knew. However I still got 125PSI on the Compression Test and called it good? Nope does not work that way it seems! Just thought I would follow up with...

Hi, Title says it all. Looking for opinions on the best model Snapper walk behind Mower???

Hi, Thanks, I was told at least 15 inches on Vacuum and 7 PSI on Pressure??? Admittedly your theory sounds very good!!! Thanks again! I'm now going to look for a Carb problem, tested fuel line and it's good!

Hi, Was not able to get this Saw tuned up so wanted to check for pressure/vacuum. Pressure held great but vacuum. I would pump down to 15 then guage would rise to 10 and hold? Wondering if this normal or what others have found doing vacuum tests???

Hi, Put everything back together and still no start? I would like to try another flywheel just for kicks but hate doing that!

Hi, No, but just did! Here is a pic, marked location of magnets on flywheel then set to TDC... About an inch from edge of magnet to edge of nearest coil leg. This flywheel has an internal (built in) key and looks fine? Thoughts???

Hi, Well... Got my pressure tester in and this thing passes pressure and vacuum tests with flying colors? (Holds 7 PSI, steady as a rock!) I'm going to put it back together and try it again. If it still does not work, I have a Buddy that owns a Lawn Mower Shop and will see what he can...