Recent content by robert1950us

Thank you for the advice greatly appreciated. Will let you know the results once I take a look at it.

Troy-Bilt Self Propelled mower Model # 12A-A2BU711 usually starts after about 3 pulls, once you shut it off after doing some mowing and stop for a few minutes it will not restart, so you leave it for about an hour or more and it will restart. Any suggestions.

When I engage my blades on my bronco I am hearing a squealing noise coming from the right side under the floor, when I disengage the blades the noise stops. any suggestions would be greatly appreciated.

Thank you greatly appreciated.

I replaced the PTO switch on my Troy Bilt super bronco 50 xp due to the blades shuts off randomly and that did not solve the problem, and I have checked the belt and there is no slippage. so I am considering changing out the solenoid but I cannot find it's location, I taught it would be close to...

Thanks for the advice, it gives me a place to start.

Thanks for the advice, it gives me a place to start.

The Model # is 13AQA1BQ011 and the serial # is 1C058H20396 it is a Troy-Bilt Super Bronco 50XP Thanks.

The Model # is 13AQA1BQ011 and the serial # is 1C058H20396 it is a Troy-Bilt Super Bronco 50XP Thanks.

How do you remove the plastic gas tank on a 2018 Troy-Bilt super Bronco 50 xp riding lawn mower.

I checked as you suggested and with the new switch the mower is still having the same issue, could it be the main drive belt slipping due to wear. just for your info my Mower Model # 13AQA1BQ011 Super Bronco 50XP. Thank you for your time and assistance.

I checked as you suggested and with the new switch the mower is still having the same issue, could it be the main drive belt slipping due to wear. just for your info my Mower Model # 13AQA1BQ011 Super Bronco 50XP. Thank you for your time and assistance.

my Troy-Bilt model 13AQA1BQ011 the pto switch works intimately so I have decided to change it but I cannot find the removal process anywhere on line. Any one has any suggestions?