Rivets's latest activity

That looks very similar to this one. Sorry I misunderstood your definition of OLD. I’ve forgotten more than I remember, so get...

Not a bad design, just needs a bit more patience and understanding on how carbs work. They get a bad rap because people don’t have the...

Started working on engines in the early 60’s. Briggs kick start, Maytag, hit-n-miss etc this site has come in handy more that once...

This is the one I have used for years when I come across an older BRIGGS. Sorry its not blue...

Solid old engine, which I call a mule, just give it a little TLC and she’ll serve you well. I suggest you remove the carb and give it a...

You said you replaced the key switch, are you sure you used the proper switch? Many switches look alike, but you must check the...

Logged in and out many times yesterday and this morning, no problems yet. Thank you for your help and due diligence in hopefully...

Hello Ibrahim, Not out of the woods yet. As has day wears on, the site is hanging up trying to open posts or send replies. 10:15 TX...

Most times it will not load anything. Other times I will type in a reply, but it will not allow me to post it. I must quit the site...

I think I’ve tried that in the past, to no avail. You must remember that many of us can fix most small engines, but are computer...

I don’t see any changes this morning. Took me 30 minutes of trying before it let me log in and forum is very slow. I appreciate all...

Well the server is being monitored more now. I did find a misconfigured script that hopefully was the culprit with our constant...

Some Raptors do not use a starter relay and some do. Attached is a wiring diagram for Raptors. Might just have to trace the wires to...

The model and spec numbers are probably stamped on the shroud, just above the spark plug or on the side. With those numbers we will be...

Please provide us with the model and serial numbers so we can see if it even has one.