Rivets's latest activity

I’m betting that you will find a parcially sheared fly wheel key.

This manual will tell you how to properly check and troubleshoot the charging system...

Have more questions than answers. Before ordering any parts please help us. 1. Please supply us with all engine numbers. 2. Did you...

To me it’s a classic example of a blown head gasket. Since you say you had the heads off I suspect 1 of 3 causes. Head and block...

MTD now builds the Cub Cadet brand so anything you purchase with that name on it will not be of the quality you used to expect from them.

Can’t be raised, must be removed. Since you didn’t supply us with the model and serial numbers for the unit, I’ve just attacked the...

I suggest you take the brake material and arm to a good body shop. They will have the best glue available for jobs like this.

I hope that when you said you honed the cylinder “as smooth as glass” you didn’t mean shiny smooth. If you have no cross hatching your...

If it came to me the first thing I would do is pull the float bowl and see what the condition of the carb is. If it was sitting that...

I suggest you start by adjusting the valve clearance first. This service manual will help you with that...

Before trying to circumvent the electrical system to solve the problem, I suggest you go through the electrical troubleshooting...

Make sure you installed the proper replacement PTO switch. They may look the same, but terminal may be different. This I’d especially...

Any good repair shop should be able to get this part for you. https://www.partstree.com/parts/kawasaki-92055-0892/

Because you were able to free it up using a block of wood and hammer, I suspect that the rings are fine and that the rod was probably...

If you try putting oil in the cylinder do it very sparingly. Now that it is free really don’t need to, as the engine oil will start...