Rivets's latest activity

Thank you Star, it come so natural that I forgot about that.

Sounds to me that the mower was run without oil. After it seized the user put in fresh oil to hide their mistake. Sometimes these...

First thing to do is check the oil level, no oil probably seized. Has oil may be seized, but need to check further. Remove the spark...

This is the tool I use, but it doesn’t work you’ll have to install a heli-coil as stated...

If you are getting 0 VDC you will need to start checking all connections between the key switch and the solenoid, this includes all...

Have you tried using a nickel instead of a quarter, sorry I couldn’t resist. Have you tried bending the edges of the foot down a bit...

Provide us with model and serial numbers so we can identify which unit you have. The good techs on this site hate guessing.

5 hours, then use whatever oil you would like to use.

I have found that sometimes using a torx wrench will grab. Not best way to do it, but sometimes you need to think out of the box.

When I run into a unit like yours I remove the battery and then I use jumper cables to reattach the battery wires to the battery...

Change after 5 hours and you’re ready to go for the season. Today’s valves and rings on small engines don’t need multiple changes for...

First thing I would be checking are the battery terminals for cleanliness and tightness. Second would be the ground to chassis...

Before digging deeper into the possible causes, I would check the valve clearances on all valves. It does sound like a fuel issue, but...

This site has the carb you will need, but I recommend a little more research before spending $$$ on it. I’ve seen this many times and...

Please give us the model and serial numbers off the silver tag on the rear of the engine If this site doesn’t help you...