Recent content by Richie F

I was thinking along the same lines to pull it. There is some metal (not much) to possibly use a long sheet metal screw also.

Got one bearing from Jack's Small Engines. The bearing I have is a NTN (Japan) The number on it is 6302C SKF has it listed Timken has it listed as 6302-2S, the shields can be removed. I'm sure there are other companies or places that sell this bearing. Dimensions are: Diameter 42mm Inside...

Both ends of crankshaft on Red Max EBZ blower

Thanks have done large seals like this but wanted to know about doing it to the blower.

This shows installing the seal, but my question was removing it. Thanks for the manual. Also I'm getting the bearings for the EBX7500 today and will post measurements and number on bearing.

Going to be working on a Red Max EBZ7500 (a.k.a. Husqvarna) blower. Is it possible to remove the crank seals without splitting case and removing the crank?

My order is coming and one bearing is in the shipment. I'll measure it and maybe there is a number on it.

Thanks

That number doesn't help. Called SKF and asked them and they said nothing comes up.

I'll try to enlarge it to get a better view of those numbers.

I know RedMax is now Husqvarna and now makes RedMax backpack blowers. I need 2 crankshaft bearings for EBZ 7500 (p/n 521521301) These bearing are back ordered so would like to know of the bearing numbers stamped into the OEM bearing. I don't have my blower apart to check and see myself right...

I'll have to look to see what bore size I have to be sure, but it gives me direction now. I see parts for this engine looks to be on Ebay now also.

Thank you for the info. That engine is 14HP and should be the spec for the 36" cut deck

Have a Scag SW36-14KA with a Kawasaki one cylinder OHV engine on it. There is no label on the engine for information. In the parts breakdown of the mower this unit should have a flathead engine. Was there a serial number or year that the mower came with an OHV engine?