RevB's latest activity

Some just don't get it that there is only a 1/16 overlap if 72" true cutting width which means the OP has to have prefect blades. Either...

As tho the ground is always level. 🤫🤔

They move.....

Okay the center blade is offset forward. And 24-1/8 Blades are only 72-3/8 total width. And tip wear would cause the problem. So the...

Good policy. I used a 10 ft pull type Bush Hog 3126 for 26 years, behind a 90hp Kubota M9000, maintaining about 12 acres of grass...

I can and I did. Multi cylinder vs single is not such a stretch. Both will be down on power and the single more so but it will run at...

Use what you have where you are. 👍 Used to use my JD 5303 and a Bush Hog 7 foot trailing to do an 2300 foot grass runway. Worked as well...

There's that reason, too. But that reason also goes way beyond lawn equipment. Cars, pickups, tractors, houses, etc. The Jones' are...

I have a Tanaka Japanese made trimmer from 1999 for $180 or so. Came with 7 year residential warranty. Still the original head on 5.5...

They sell thermally resetting fuses...mostly for automotive but works for anything else as well. The time between the event and reset...

James Condon just did a video this week where the 15 amp fuse on a standby generator engine was blowing randomly and it was a...

Coil replacement. If needed.....

Ignition would be my first guess, but will need to confirm loss of spark after engine dies with a open gap spark tester, not a blink...

Yes, I know the shaft can't be allowed to turn. I can handle that. I have two 13" rims from my trailer that will work nicely, I think...