Finally got around change the hydro oil and filter on my Silver Eagle 27/60 although the guy I bought it from said he just did them prior to be buying. I have maybe 40 hrs on it at the most since buying about 2 years ago. I spent heck about 2.5 hrs trying to remove the filters as looks like he...
Hello me again! On my 2012 had a front wheel bearing on left side fail apart. Looked up the part numbers for a 2012 SE 27/60 which calls for 900340 Bearing Kit which has 4 bearings...2 flanged outer and two inner and a spacer. The ones I removed from wheel was just 2 outer flanged bearings and a...
Got done mowing today and while blowing it off decided to check fluid level in tank and notices little bit of white milky sludge on cap. Now I changed fluid last spring and it has about 28 hrs on it and its kept under a shed so I figure its the humidity here in Georgia. I shined a light inside...
Wanting to go with some synthetic 20w50 for my 2011 SE 2760hp. Yea I know conventional oil will work but going to try and keep this ZT for a while. Those that are using 20w50 syn oil what are you using and where did you get it? Right now all I can find is online and consists of redline,royal...
Hi all, That time again for breaking out my 2011 SE 27/60. I know the manual states 1000 hours or annually. Now all I'll about preventive maintenance but also don't like to waste money. Should I still change yearly even though low hours or what? Thanks
I know the discharge side outside spindle has side to side play but also notice all 3 has up / down play (grabbing top of pulley and moving entire shaft) is that normal? They other 2 does not have side to side play just up / down.
On my 2012 silver eagle 2760 (bought used with around 750 hours) should the control arms go back by themselves to neutral position slot when released? I bought it used last year replaced all the worn parts on steering linkage that was causing play including the self centering dampers but only...
Hi just got a used 2012 (wrong year in title)... silver eagle with 27HP Generac motor that supposedly it has 747 hours but guy says hour meter died when he washed it the other day and now I'm finding some more issues I did not notice before hand.Noticed today that it has a tendency to roll...