Recent content by ProMower

  1. ProMower

    Craftsman Mower Will not start with Auto Choke

    Ya, I know what you mean. But I of course did that. Anyways, works perfect now!!
  2. ProMower

    Craftsman Mower Will not start with Auto Choke

    It's a new carb, and runs fine with sprat as I mentioned. The idle jet is for a surging problem, plus the idle jet does not matter when starting a motor, plus to clean the idle jet... unthread a wire from a wire brush. Thanks for trying to help but it would be better if you read my post. I can...
  3. ProMower

    Craftsman Mower Will not start with Auto Choke

    It is fully closed and it is a new carb. But looking again at the photo as you pointed out made me realize there is a possibility of too much air and not enough choke, so I bent the larger side of the plate just a touch to move it closer to the edge and placed a layer of epoxy on the other side...
  4. ProMower

    Craftsman Mower Will not start with Auto Choke

    This one has me stumped. It is almost new with a new carb, new fuel, everything is spotless. It uses an air vane auto choke, with a choke thermostat for warm starts. The choke plate is fine and in place. The cover is off in the photos. I can start it easily with spray, and it runs nice. It will...
  5. ProMower

    Engine tries to stall out

    Clean the jets again or replace it, $20 or less.
  6. ProMower

    Help! New Carb - Still Keep Stalling

    You need to have the spring link and the rod link in the right holes without being twisted. See Photo. No if it still happens where it will not stay running or hard to start, your new carb got dirty somehow. Change the spark plug too, NGK or Champion.
  7. ProMower

    Help with carburetor please

    You did the right thing, buy a new carb for $28 and be done with it, many more years of reliability without the problems.
  8. ProMower

    Fuel issue JD160

    Try another pump is my suggestion.
  9. ProMower

    HONDA GCV190LA. PULL STRING IS PULLED OUT OF MY HAND.

    If it pulls back on your hand, the timing is off. Why did you adjust the valves? If you did not hit a stump or anything previous then retrace your steps and double check the timing marks. Stick with parts for your exact motor. There can be a lot of rotation where the valves do not move. You...
  10. ProMower

    Fuel issue JD160

    Take the fuel line off the carb and turn the engine over, if gas comes out of the pump it is working, if not, bad pump. If it works, then it makes sense it should feed the carb.
  11. ProMower

    Pull chord stuck

    Great link!
  12. ProMower

    Help! New Carb - Still Keep Stalling

    New carb, check, empty tank and dry it out before new gas put in? check or no check? If not you may have bad gas in your new carb. Also make sure your linkage is perfect.
  13. ProMower

    Poulan s1838 chainsaw won't start

    ok makes sense then, rebuild or replace the carb.
  14. ProMower

    Poulan s1838 chainsaw won't start

    ok what exactly did you say in this sentence? "ended up replacing a broken at the bottom fuel line"
  15. ProMower

    Poulan s1838 chainsaw won't start

    When your fuel line breaks all the fine dirt in the tank goes into the carb. You can clean the carb, there is a screen filter within, then sometimes you need a carb kit (gaskets, diaphragm). Often it is better to order a new carb, (carb, filter and new fuel lines) sometimes as cheap as $20...
Top