Recent content by nanoGiant

Yea, the choke is manual, and I did check that, because that is exactly what it's acting like. One thing I did notice, when it's running if I pull off the fuel line from the pump to the carb, I would expect to see gas pumping out, but none is coming out, obviously it's getting fuel. Why would it...

Does anyone know what the compression should be on the Loncin 24.5 HP engine should be. Didn't see that spec, in the service manual. I'm getting roughly 100 in each cylinder. Also as an update, both cylinders are firing, but it won't get full rpm, and blowing black smoke. Running rough. I'm...

What really bothers me is the amount of smoke coming out when I run it, I'm afraid of harming the engine running it that way even for a short time.

Usually just wash with garden hose. I know where the water came from, if that's where you're going. I had a 55 Gallon drum with non ethanol fuel I use for my small engines, I had recently pumped out some to fill my 5gallon containers. The first 5 gallon container was the one I put in the mower...

I will give that a shot! Thank you

Agree I didn’t think it was fair to expect warranty to cover it. At least if it was a result of the water.

Yes

If it hydro locked would it still have good compression? You think like broke a ring or piston?

Model 75755 purchased 2 years ago. Thank you.

This is what it looks like, just one carb. Sorry looked in owners manual to find more info on motor, doesn't get any details on who made this motor. My guess is some of you will know this engine by looking at it.

I have a 2 year old Toro with a Toro Labeled Motor, I think it's Briggs, 24.5 HP, v twin. I had put some gas with water in it, and obviously quickly quit running. Once I figured out the problem and drained the gas out, and put new fresh gas in, the engine has one cylinder dead. The plug is very...