MParr's latest activity

They do a FAIR job on dry grass and leaves. However, high lift or OEM blades do a much better job. Remember, mower companies designed...

I had a set of G6 on my Gravely Pro Turn 260 this morning. I took them off shortly after I started mowing. Grass soup was falling out...

@StarTech Rotary lists the #6026 as a fit. Maybe a local dealer would let @BigBlueEdge try a set for fit. If they fit without striking...

One more thing, Gator blades make for a horrible cut. If your grass is just a little damp, they will pack the deck with clippings. This...

The tire pressures must be set before making leveling adjustments to the deck.

https://www.oregonproducts.com/en/mower-blade%2c-24-3-16%22/p/99-429

24.218" from blade tips to blade tips. https://shop.badboymowers.com/products/part-038-1030-00-6-pack-of-72-high-lift-fusion-fusion-blades

Well that would leave no overlap; unless, BB is lying about the cut width as 3 x 24" is exactly 72". I have yet to see a mower with no...

Each tank has an individual gauge. I often mow till one tank is out of fuel. It doesn't hurt anything. Besides, most of those fuel...

It is so you have reserved fuel if you run out on the back 40 and it give a hint you are low on fuel. Besides what if you bust one of...

Most, if not all, commercial mowers have a 3 way fuel valve. The Bad Boy Maverick HD is one step below what is considered a true...

Ding! Ding! Ding! You are correct. There is no way to get fuel from the other tank.

Fuel breakdown on previous drawing Which is the 3 way valve but the parts diagram shows the label for the 2 way valve And more...

After doing some more digging, drawing fuel from the right tank only is a common problem. Change out the fuel cutoff valve with a 3 way...

Well according to IPL for that 2023 model [lookup by the serial number given] the label is correct and when I look at the fuel tank...