MParr's latest activity

I agree. However, I believe that Bad Boy installed the wrong valve at the factory. The OP has a Maverick HD. It has two tanks. The...

I never heard of or seen a dirt dauber that can survive gasoline long enough to do anything. But I would first trace the lines to see...

so where is the second line? Do they go to a Y then the on/off valve? Is one stuffed with a plug in the end? Should not be hard to...

The hose you highlighted in blue is a vacuum or vapor hose. It appears to be one fuel line in and one fuel line out. The one on the...

OK. I can level the deck front-to-back and give that a try.

I run gator blades on a 61" ferris. They do cut the grass finer than stock blades but they do not mulch. Commercial guys use chute...

How can the valve be correct? It's obviously just a shut off valve. The valve should have a left, right, and off setting. This is your...

You would be surprised. There is no one deck setting to fit all. I have a Gravely Pro Turn 260. Gravely says to set the rear 1/4" to...

Use OEM blades or equivalent aftermarket blades. With that 72" deck, run it level all around. No forward pitch.

Ah now I see what you mean as if the pliers opening between the tips are enough they would work. It didn't even dawn on me but what does...

Here is the reassembly order I suggest you follow. 1. Admit that I’m smarter than those on this forum who have tried to help me. This...

Holy cow! I can't believe I just sat here and read through all 9 pages of this thread going back over a week! JimP2014, I do believe...

I've already suggested that he "call the man." Other than that, I'm done.

Not you for sure. I don’t know why I keep following this thread, but it has gotten so bad I have to warn others not to use anything you...

From service manual Yes either oil pressure has failed or the engine operating oil pressure has dropped below 14.2 psi. I have seen...