MParr's latest activity

Ding! Ding! Ding! You are correct. There is no way to get fuel from the other tank.

Fuel breakdown on previous drawing Which is the 3 way valve but the parts diagram shows the label for the 2 way valve And more...

After doing some more digging, drawing fuel from the right tank only is a common problem. Change out the fuel cutoff valve with a 3 way...

Well according to IPL for that 2023 model [lookup by the serial number given] the label is correct and when I look at the fuel tank...

I agree. However, I believe that Bad Boy installed the wrong valve at the factory. The OP has a Maverick HD. It has two tanks. The...

I never heard of or seen a dirt dauber that can survive gasoline long enough to do anything. But I would first trace the lines to see...

so where is the second line? Do they go to a Y then the on/off valve? Is one stuffed with a plug in the end? Should not be hard to...

The hose you highlighted in blue is a vacuum or vapor hose. It appears to be one fuel line in and one fuel line out. The one on the...

OK. I can level the deck front-to-back and give that a try.

I run gator blades on a 61" ferris. They do cut the grass finer than stock blades but they do not mulch. Commercial guys use chute...

How can the valve be correct? It's obviously just a shut off valve. The valve should have a left, right, and off setting. This is your...

You would be surprised. There is no one deck setting to fit all. I have a Gravely Pro Turn 260. Gravely says to set the rear 1/4" to...

Use OEM blades or equivalent aftermarket blades. With that 72" deck, run it level all around. No forward pitch.

Ah now I see what you mean as if the pliers opening between the tips are enough they would work. It didn't even dawn on me but what does...

Here is the reassembly order I suggest you follow. 1. Admit that I’m smarter than those on this forum who have tried to help me. This...