MParr's latest activity
-
MMParr reacted to farmerdave1954's post in the thread Still trying to get the mower deck right with
Like.
Holy cow! I can't believe I just sat here and read through all 9 pages of this thread going back over a week! JimP2014, I do believe... -
MMParr replied to the thread Still trying to get the mower deck right.I've already suggested that he "call the man." Other than that, I'm done.
-
MNot you for sure. I don’t know why I keep following this thread, but it has gotten so bad I have to warn others not to use anything you...
-
MMParr reacted to StarTech's post in the thread Z930M Mower: Steady Red Warning Light Diagnosis with Like.
From service manual Yes either oil pressure has failed or the engine operating oil pressure has dropped below 14.2 psi. I have seen...
-
MMParr replied to the thread Still trying to get the mower deck right.
-
MMParr replied to the thread Still trying to get the mower deck right.The only ways that pulley could be tilted is a bent bolt, wallowed out bolt mounting hole or bent mounting bracket. THE END!
-
MI agree with Rivits's assumption. The black pulley looks tilted towards the fron of the deck. It also looks low to the spindle pulley...
-
MMParr reacted to JD14SB's post in the thread Old 4HP Snapper Walk-behind Mower. Need small belt on self-propelled. with Like.
Cool for the Snapper information. When I sharpened and balanced the Blade, it was severely out-of-balance. The blade material is super...
-
MMParr replied to the thread Old 4HP Snapper Walk-behind Mower. Need small belt on self-propelled..It could be a 214X1P
-
MMParr replied to the thread Mowing habits I hate.Unless the grass is wet.
-
MMParr reacted to Tiger Small Engine's post in the thread John Deer With Kaw Engines Question with Like.
I am not a big fan fan of John Deere. Overpriced, overrated, parts are higher for OEM, and often more difficult to work on. Kawasaki is...
-
MMParr replied to the thread Still trying to get the mower deck right.Time to punt! You need to get the deck out from under the tractor and evaluate the problem. There may be a problem with the deck. Are...
-
MYou were typing at same time as me in your post 20 For one: (in the video) as to what Rivets noticed also the belt is riding too high...
-
MMParr reacted to It ain't no Briggs's post in the thread Series 7000 "Low oil Pressure" message and stall with Like.
Added 2 ounces of Sea Foam per gallon of gas and ran it at about 1/3 throttle for close to 2 hours with a fan on it then got on it and...