Recent content by Loose_Screws

Thanks for all your help, ST. It's cold with quite a bit of snow here in West Virginia. I'll try to work on the mower next week when it warms up a little and the snow is gone. I don't need to mow, I need to use the mower as a tractor now.

While I was composing the post earlier, I was thinking that it didn't seem right that a black wire would be the power supply. I'm pretty sure the green wire is the power supply. ST, are you suspecting that the safety relay might be causing the problem?

LOL, I was thinking that it didn't seem right that a black wire would be the power supply when I posted above. I'm pretty sure the green wire is the power supply.

I just figured out the schematic. The black wire going into the connector is the power supply. The blue wire coming out of the connector goes to the left steering lever. If I'm going to bypass the seat safety plunger switch temporarily, I'll want to run a jumper wire from the black wire to...

I can't do it now, but later I will look at the seat safety switch connector again. It would be great if this is where the problem is. Husqvarna's wiring schematic is so poorly done, I can't make much use of it. It would be nice to be able to put my fingers physically on each wire coming out...

StarTech, I have exactly the same problem as Ciscoborb has in this thread. You also responded to my post concerning the same issue in a separate thread. In my case, the seat switch connector is definitely not loose, disconnected or unplugged. I really appreciate your interest and effort in...

StarTech, can you please tell me more about this "shorting strip?" Is that the same thing as a shorting block? Thanks.

Yes, I know.

I have the exact same problem. Did you find a fix ?

I have a problem with a Husqvarna Z248F zero-turn mower. It's a 2015 model. When I move the steering levers inward with the seat occupied, the motor stops. It seems logical that the problem is probably with the safety switch under the seat. I've removed the seat switch and by using a...