Recent content by Lonestar

  1. L

    XT2 LX46 2021 model

    Yeah, I know what a Stillson wrench is, I couldn't understand where you were saying to put it. From what I can see with the clutch still in place, I'm not sure there is any accessible place to grab with it, but I will know as I remove the clutch. Maybe the spacers are a possibility. I've...
  2. L

    XT2 LX46 2021 model

    Not sure what you are saying??
  3. L

    XT2 LX46 2021 model

    I was wondering how to keep the rope from putting pressure on the valves. What does the helper need to do? Are you saying it's probably OK to use a screwdriver wedged in the flywheel? I wouldn't think 55 ft lbs would not be a lot of pressure on the teeth.
  4. L

    XT2 LX46 2021 model

    Got it, thank you. What is the preferred way to keep the drive shaft from turning while removing the hex cap screw and re-torquing? I've seen videos where sprk plug was pulled, and a piece of rope was inserted in the top of the cylinder, and then another where a screwdriver was used to wedge...
  5. L

    XT2 LX46 2021 model

    Or it's possible that the Clutch Stop Bracket can be removed and access to the drive pulley made that way by just slipping the belt over the clutch. I'm looking for the most simple way to do this and was hoping someone had actually been through this process. If I do have to drop the clutch, do...
  6. L

    XT2 LX46 2021 model

    Cub Cadet apparently made some changes in the XT2 in '21 as in using an electric clutch. I can't find any info online as to how to change the drive belt with these models. It looks like either the clutch has to be removed, or the bracket holding the clutch has to be removed in order to slip the...
  7. L

    Kohler K161 carburetor

    Yes, that's the parts number I'm showing on the points, with the condenser being 47 150 03-S. I just don't feel at this point considering the age of the engine and my knowledge, I can justify using original Kohler OEM parts. Who knows about other major issues such as valves, etc. I will say...
  8. L

    Kohler K161 carburetor

    OK will do. I've read the section in the manual, but will go back and review again. I'm all about not spending any more than necessary, but I can get a third party points and condenser set on amazon for $20. Of course genuine Kohler parts are very expensive. For $20 I'm thinking I can...
  9. L

    Kohler K161 carburetor

    Well, just a quick update. I rebuilt the carb, and you were right, it was an easy job. It was pretty dirty but cleaned up nicely. Now the bad news. I have no spark at the spark plug. Of course it's a new plug, gapped correctly. I then checked the points and cleaned the contacts with a...
  10. L

    Kohler K161 carburetor

    Thanks for the info. I'm not sure what you mean by "Your problem stems from the use of the fuel stabilizer". I did not know I had a problem at this stage?? I have not used a fuel stabilizer, as there has been no fuel in the tank or through the engine. If you are referring to the Marvel oil...
  11. L

    Kohler K161 carburetor

    This is the website I've been getting my parts numbers from. The internet is wonderful!
  12. L

    Kohler K161 carburetor

    OK. I think it is more of a detergent or non-detergent issue. I thought maybe those classes were different in that aspect. For some reason I thought non-detergent oils were recommended in engines without a filter. Again, I doubt it's an issue in this Kohler engine. Probably the least of my...
  13. L

    Kohler K161 carburetor

    Yes, I definitely was planning on changing the oil. I'm in TX so temps here are still in 90's. The Troy build manual calls for 30W SE class oil. The Kohler manual calls for 30W SC detergent type. Not sure what to look for?? I've already been putting Marvel Mystery oil in the cylinder for...
  14. L

    Kohler K161 carburetor

    If you have time let me ask this. The tiller has been setting up for 20 years. Well kept in my garage. I always turned the tank petcock valve off after using, and let the engine run until all gas gone, and engine stopped. Before tearing into the carb, do you feel I could spray some carb...
  15. L

    Kohler K161 carburetor

    Thank you very much. That is a great manual for me to have, and I bet I can get through the carb rebuild using it as a reference. I wish I had just a little of your experience. One more question please. In my OP I mentioned there is a spec number. Does this mean there were variations in the...
Top