Recent content by logert gogert

Sounds like a good idea. Only flaw I see is when you go to replace the filter. Depending on what you use to make the seal will get stuck

Could possibly be a exposed wire touching the frame causing it to shorting out, I would check the wiring harness and make sure there are no exposed wire that has been stripped and/or chewed off by an animal

Does it surge at all at higher RPMS?

Somebody may have to correct me on this but Perhaps your spark is cutting out at higher rpms. Maybe your timing is wrong. Or misfiring.

Didn't know the energy drink company made mower bags

thats what i said i said "And you have to make sure the wheels arent to big to where it dosent rub on anything. And make sure the bigger front wheels dont rub on the forks.

I assume you could. But you have to take note that the bigger rear wheels will make your machine run a bit faster. And you have to make sure the wheels arent to big to where it dosent anything. And make sure the bigger front wheels dont rub on the forks. But if i were you id look to see if there...

only differences i see are that the model with the 2620H comes with tools, whereas the 2620 does not

dude! thats awesome! im glad you got it and its running, im still looking for one for me to work on.....

Yes, I agree with rivets, maybe your float got stuck ( even though you just cleaned it ), and gas could have leaked out of the carb into the motor. Another way to check is to feel the oil and if it is not as thick as oil then it has gas in it, or of course smell it like rivets stated.

Is the oil level high?

Do you have the original belt? If so, try to size them up and see if they are the same length. And if you can please post the model numbers.

Welcome!! We are here to help!

has it always been like this?