One more question if you don't mind. I just bought this Husqvarna 2013 26V54. The seller told me that it "loses it's prime" and that he has to blow into the gas tank to get it started. I found that the vacuum hose on the fuel pump was split. I replaced that hose but still need to take gas cap...
Thanks StarTech, I may have written it wrong but meant that as you say the 4740-4741 are the Husqvarna original drag link part numbers. On eBay they have those parts numbers 4740-4741 adjustable but for $119 a pair. They also offer the 9599-9600 but for $94. I just wanted to be sure that the...
+I need the adjustable links but the price for the adjustable 532409599 And 532409600 are $30 less than the adjustable 532194740 and 532194741. Are you sure that the 740 and 741 is the same as the 599 and 600? Just want to be sure before I purchase them. I can't find any cross reference that...
Thanks for the response. I will try to post pictures tomorrow of the right wheel almost off the ground when turning right. I am considering replacing the axle shafft and axel shaft bushings. On a Husqvarna Support, someone else had a similar problem and the tech said either spindle or bent...
Thanks for the response. Where is the cross member? Is that what the axle sits in? The axle is free and moves up and own freely. Should I change the axle and the bushings? Would that help? I have already changed the wheel spindles and drag link rods connected to fan gear but didn't change fan gear.
Thanks for the help. Starting to rain. Will take picture of tire off ground tomorrow. Problem is, I know nothing about the mechanics of it or probably wouldn't have bought it. Just hoping to fix it without to much cost in order to use it for a few years. Thanks again.
I just bought a used 2013 Husqvarna YTH26V54. The man I bought it from said it needed a wheel alignment. When driving it around I noticed that the right wheel barely touched the ground and seemed to actually not touch the ground sometimes when turning right. Both tires are just about worn out...