ILENGINE's latest activity

I’m guessing Husqvarna, sure looks like this one. https://www.ebay.com/itm/127360612885 It would have been a lot easier if the OP would...

Looks like the deck off a YTH2448T Husqvarna only the deck it a different color

Wrong deck hangars for the deck in the Original post.

That is a Briggs pulsa-prime carb. From the paint looks original to the mower. Not much to repair on those. Make sure the inlet...

husqvarna spindles

Husqvarna mower. Too many other possible variables to determine model number it came from since that deck could of been used on...

Was about to suggest you see if a squirt of carb cleaner would get it to start, then saw your new post. I think you have eliminated the...

The 49X977-0015-J1 CXI 27hp EFI engine uses the 84007055 oil filter

I use one of these...

696854 standard yellow filter they have been using for years. That is for the dry sump engine that can operate at 45 degree angles...

Im usually able to grip the heads with Irwin vice grips and get them out that way

If the carb is a Nikki or Mukuni carb they are NOT Phillips head screws they are JIS screws. Indicated by a little dot next to the X shape.

Item 50 part number 683-04176A sub to 783-04567B

I suspect the anti rotate bracket has come off or not connected allowing the tranny to tilt. Picture of frame to axle mounting bolts...

Being a '11 model has you checked the CVT pulley bearings [6203-2RS]? And there is no adjustment related to the CVT pulley to transaxle...