ILENGINE's latest activity

I would assume they are referring to 0.8 mm which translates to 18 gauge.

Item 957 https://www.partstree.com/models/104m02-0010-f1-briggs-stratton-vertical-engine/exhaust-system-fuel-supply-7/ part number...

Check out the John Deere freedom mulching deck. It has the toothed timing belt.

Sounds like choke is hanging up momentarily, then recovering and running right.

You don't have to. I really feel old as I know I am not a Spring chicken anymore. Those aches and pains reminds me every day.

I kind of see that in my area. People think that they work on their own equipment so they could work on other people's equipment. And...

Idle speed seems fine to me. This engine most likely has a governored idle, so engine speed is being controlled by idle governor spring...

I like to put fingernail polish over it

Model number info for the engine is most likely stamped into the side of the engine block on the side opposite the fuel tank and carb.

something sounds very wrong with your post. Did a heli-coil or thread cert come out with the plug? They are commonly that size on the...

I have never seen a 9/16 spark plug thread. All spark plugs have been metric thread since 1934. I would suspect that you have the...

And you are correct!, it would seem. Not being 100% convinced, I ordered one of the chinese B&S knockoffs from Amaz' (instead of OEM)...

Made by Kioti Most likely the same as the CS2510H And warranty would be handled by your local Bobcat dealer. So go see your local...

Each tank has an individual gauge. I often mow till one tank is out of fuel. It doesn't hurt anything. Besides, most of those fuel...

https://www.partstree.com/models/31h777-0202-e1-briggs-stratton-vertical-engine/camshaft-crankshaft-cylinder-operator-s-manual-piston-rin...