ILENGINE's latest activity

Hello MedicineMan7, Look for a main fuse box and check all fuses, then inspect all harness wires for any rub through damage. Will it...

From the looks of the intake valve and cylinder walls, there is a high amount of dirt ingestion causing excessive wear The intake...

Looks like incorrect choke return spring, and the thermochoke control lever is rotated away from the choke hold open tab. So the...

And how many of the old techs could have a customer walk into the shop and say I need this part for my 5 hp Briggs and you could go to...

Doesn't appear to be any dealers in Iowa that have both Landmaster and Briggs status. I wish I was closer since I am Landmaster...

If it starts and runs fine after using starting fluid I would think the camshaft would be fine. But not starting without fluid makes...

First thought is hole in fuel line leaking gas and/or sucking air into the line. Second thought is to check the oil to make sure it...

Both Partstree and my Husqvarna distributor show both the cable and the rear drive unit in stock. Hope you are sitting down and really...

If you are seeing cracks at the axle mounting flanges on the frame that normally means that the front transaxle support has either...

My first thought would be head gasket. But also wouldn't overlook a possible valve cover gasket leaking onto the exhaust. Make sure the...

It's toasted, the magnet coil is melted down. It was likely noisy for quite a while has the bearing failed.

Well the server is being monitored more now. I did find a misconfigured script that hopefully was the culprit with our constant...

Your efforts are appreciated; some very good members have dropped out due to the hangups. We are all just trying to help people the...

I am monitoring it and have been noticing the slowdowns. I haven't been able to find what's causing them yet, but I've put more active...

Hello ILENGINE, You are correct. It's on the right side of the transaxle assembly for this model. My old Huskee garden tractor is a...