ILENGINE's latest activity

Remove the spark plug and turn the engine over slowly by hand and see if that piston is going up and down. Remove the valve covers and...

Here you go. It is an Murray made by MTD manuals...

Look straight up from the first word in this response. Date posted is right there!

Hello ILENGINE: I don't disagree with you, and I have used that same process myself when a solenoid fails. It works sometimes and...

@trooper1954 I think the diagram is somewhat misleading They show the washer going on before the adjuster wheel mounting plate, but...

On the Kohlers you can full choke cold start them with a failed fuel solenoid. I have seen it more than once in my career. I have even...

Here is a picture of the 110-7191 that we are saying is the correct part. You can compare it to the washer in your picture They look...

The afterfire solenoid has no effect on the float valve, or fuel flowing into the carb. So as the fuel in the bowl evaporates it will...

found my issiue , fuel flow solenaid had and open coil never allowing fuel to enter carb 👍

Here it is on the Toro parts website item 15 https://www.toro.com/en/parts/partdetails?id=48721&iid=454794&pid=501829

Toro part number is 110-7191, which is what you are looking for.

They maybe calling it a thrust washer item 15 on this diagram...

I don't know if your have a Briggs engine or not but some have a plastic tip on the fuel solenoid in the carb bowl. Have had a few were...

I think you misunderstand what was being discussed. The 1/8 inch was not the valve clearance gap but how far the cam lobe lifted the...

Actually it is NOT. A fuel shutoff solenoid shuts off fuel flow into the carb. The afterfire solenoid doesn't effect fuel flow into...