hlw49's latest activity

If the coil is hitting the magnet on the FW there should be scuff marks on the magnet, if there are no scuff marks on the magnet. It...

.008 to .010 I set it to .010

Dixie Chopper through the years. https://www.dixiechopper.com/our-legacy/ Still going strong in some areas. I own five three running and...

If the belt is crossed the blades will be running backwards

From the picture it looks like the belt is crossed. Is it routed right?

Level the blades side to side. Turn the blades where the blades point front to rear. Front of the blade tips should be1/8 inch to 1/4...

What a dumb dealer the Magnum is a great mower. Looks like they have discontinued it and replaced it with the Falcon. When I worked for...

Pumps probably getting weak. Might try Lucas Hydraulic Oil Booster and Stop Leak up to 50% in power steering pump. Probably not that...

what is the sealant for?

need spec. off the engine

I have a Dixie Chopper XXW2500 72 inch cut that has the 33 HP on it. Came with a 25 HP Kohler. Had the Generac engine on it when I...

33 HP engine Dixie Chopper used them until about 2012. It was a great engine until the EPA came out with some new omission standards...

Have seen the bottom sleeve bushing work its way out. Moves down and cuts the seal. I took a pvc pipe and it fits over the shaft and...

VapoCept is a scam

If that was dc volts out of the regulator that would be good you need probably 30 volts or more ac out of the stator.