hlw49's latest activity

  • H
    Wonder how many people caught that I for one did not.
  • H
    hlw49 reacted to ILENGINE's post in the thread Tiller with 5 Hp B&S with Like Like.
    The rod in the second picture doesn't connect to the sprocket. It connect to the governor arm on the side of the engine and then the...
  • H
    hlw49 replied to the thread Random dead miss..
    ROFLMAO
  • H
    hlw49 replied to the thread CV730 has me stumped.
    Could be a loose valve seat. Burned valve or worn cam shaft. Turn the engine over by hand with the valve cover off and see if both...
  • H
    hlw49 reacted to GearHead36's post in the thread Kohler Engine Life with Like Like.
    A few years ago, I bought a ZTR with a Kohler Confidant engine, a variant of the Command family, I think. The mower looked like it had...
  • H
    hlw49 replied to the thread badboy mz magnum.
    One way I have found to eliminate the second person. I have a large wheel weight and set it on the seat. Works great.
  • H
    If fluid gas has entered the charcoal canister it turns it into a solid mass which basically requires the replacement of the cap.
  • H
    Even if you clean the inside of the case and sump very well, run it for 15 minutes and change the oil again. On the second change if you...
  • H
    hlw49 reacted to Skippydiesel's post in the thread Seat springs with Like Like.
    Start by checking your tyre pressures - The first "spring" in a wheeled vehicle/equipment, is the tyre wall flexing. Too much pressure...
  • H
    hlw49 replied to the thread Seat springs.
    I have three Dixie Choppers that I mow with and have a suspension seat on one of them a suspension system mounts under the seat that...
  • H
    hlw49 reacted to Tiger Small Engine's post in the thread Seat springs with Like Like.
    Springs won’t really help either. Most riding mowers, and zero turn mowers, ride like lumber wagons unless you have a suspension seat. I...
  • H
    hlw49 replied to the thread kawasaki fs730v-bs07 coils.
    Will not ever buy an aftermarket ign module unless the oem is not available. Bought two back to back trying to save money one lasted...
  • H
    hlw49 reacted to MParr's post in the thread Discharge problem. with Like Like.
    You haven't said whether or not there is a mulching kit installed on the mower deck. The blades must be installed with the cutting edge...
  • H
    hlw49 replied to the thread JD Z225 Repairs.
    Working on Z425 that the engine is turned sideways. Have to pull the left fender wrap muffler shield left rear wheel to get to the valve...
  • H
    hlw49 replied to the thread husqvarna z254f transmissions.
    Check the releases on the hydros
Back
Top