hlw49's latest activity

Thanks. I'll take a look.

yw

Hello hlw49 Thanks for that! Doug Lee

No compressio release works off the bottom valve which is the intake. Three things can cause this problem valves out of adjustment...

Out of due respect for the person that answereds the post and got it right it would be nice to thank them. I have answered post and got...

Look up the clutch do a google search on it found one for less than $100.00

Oregon Round Gator line with aramid core. Not suppose to use cable or wire any more it can break and stick in your leg or put your eye out.

Does it have a mow in reverse position on the switch try running it in this mode if it does.

STATIC GOVERNOR ADJUSTMENT 1. With governor lever nut loose, push governor lever counter-clockwise as far as it will go (wide open...

Seems like the deck belt is shaking really bad. Check the V pulleys for something stuck in the groove, or check the deck belt for an...

Does Snapper make their RER mower anymore. It is bullet proof. Forest Gump mower LOL I still have one but don't use it. I had one that...

130 inch lbs on clamping bolt

pull the kill wire off and check for spark if no spark you might take the coil off and clean the mounting areas and recheck for spark...

I assume you already have the engine or are you going to have to buy it. They make an FX730 engine with a one inch shaft. The shaft has...

Most likely it is oil seeping past the rings while setting overnight or longer. And then burns off on first startup. Shouldn't happen...