Recent content by Hammermechanicman

Apply a thin coat to both sutfaces. Give it a few mins then assemble. Stuff is super tacky and stringy. Not like RTV silicone sealants.

The 825i has the fuel pump in the gas tank under the seat. It should put out 45psi at the regularor. Disconnect the fuel line from the engine and turn key on and try to start you should have 45psi fuel pressure. If not then fuel pump problem. If you have good pressure then computer/injector or...

https://www.amazon.com/Three-Bond-Sealant-Liquid-Gasket/dp/B007TWXI1K/ref=mp_s_a_1_3?crid=2RQ5O5547IZWH&dib=eyJ2IjoiMSJ9.Bk59c7CIyM-KAh8poa77ZQx9P7D9dr9bH0VLKnItAQMHmKrMriTc0EmCKDUnD9sq8VAzlpJEY3P_voVoDuCJUbnOAk0XT0GNFszdGUa3K_jeow61kML0o5TUXObsb-z_6PXQxF8-1w2-rALZfPi7JNpbb9XiLjj7ynr_TVPPRAS31m8f...

Does it matter on point systems?

There are vids on utube of guys recharging flywheel magnets. Back in the old magneto days "recharging" the magnets was routine maint. I have never tried it you might give it a try.

3 bond 1184 Honadbond. Yamabond. All the same stuff. This us what all the japaneese mfgrs use to seal motorcycle cases good stuff. I use it on magnesium chainsaw cases.

If you have the throttle lever like this Here is a pic. It doesn't show much The linkage is like the one with the red arrows that star posted. The original fuel pump has been replaced on mine so yours will be different. Hope it helps. I literally pulled this out of a load going to the...

There are 2 different JD111. Does yours look like mine?

I still have a 2003 laptop running XP that has $1200 audio and acoustical testing and analysis software that is licensed to that laptop. My audio business is winding down so not going to drop $2k for the new version and a new laptop.

I used to like computers. Not any more. I still have a couple running XP. LOL. Getting too old and cranky to deal with it. 11 sucks bat crap off cave walls.

I don't stock parts like you do but the ones i do stock i price out at the current replacement cost plus markup regardless of what i purchased them for. Many things have over doubled in cost.

Yes i have. Many automotive gas filled shocks come compressed with a plastic strap you cut off after install. The ratchet strap achieves the same thing.

Wrap a ratchet strap around it to compress it.

I don't have animals but my bro in law across the creek from me does. Years ago we built the high rent district chicken house. He has never lost a bird as he puts them in every night and it has 7' fence around it. We still remove quite a few coons and ground hogs a year from the planet because...

It works pretty well. It is good on nuts and stuff like that. but on bigger stuff a torch with a rosebud is better.

I bought the accessory kit of different coils too. I like it better than the torch. Here it is on amazon...

See post #8

This is 6th or 7th one of these i have got running for a guy. He collects odd and rare lawn tractors and they have always been setting for years. He takes them to shows and drives them around for a few minutes and parks them for display. I am already $500 into this one and haven't even looked at...

Next time i have one of those MTD pulleys that has never been off for 15 years i will have one of the folks on here just pop it off for me. LOL

I charge by the hour and i don't give estimates on belt changes.

So far most of a can of PB Blaster and lots of use of the induction heater bolt buster and an impact wrench.

Probably going to cost the guy $1-2k to get it running.