Recent content by gregboggess

There is 25.4 mm to an inch, so are you saying they are 1 1/2 inches shorter?

Sounds like the exhaust valve guide has moved.

Alien tape!

Remove the transaxle, remove the filler plug (remove the magnet), drain the oil out, replace the magnet and refill refill with 15/50 (about 72 oz's). Since the axle has been replaced the trnsaxl. has been removed once,I would reopen the the trnsaxl. and see if it was sealed properly.

Thanks for the clarification.

What is Tramlaw?

I have three 54" cut Husqvarna mowers, 2 w/Kohler and one with Briggs, One of them I have three Husqvarna 54", 2 with Kohler, 1 with Briggs, all were purchased used @ 300+ hours. One has over 1000 hrs., the other two are 700/800 hrs. I prefer the one with the Briggs only because it is VERY fuel...

Me either.

Bolt for trans. suspension?

Well now . . . thar's not a normal color for trnsaxl fluid is it? Viscosity is about 10/15. Does it look like it it has water contamination?

????????? For wandering?

I have a Husqvarna GT54CS that wanders as I mow or simply move down my road, gravel or paved. Last year the mpwer tech. replaced all the steering gear,upper and lower steering support, selector gear, and all drag links. Could the spindles or pivot bolts be the cause of the wandering?