Recent content by Freddie21

I think you're jumping the gun with an engine diagram. First, determine what's is obvious as being wrong and go from there. Once you see damage, then you'll figure wither you want to tear the whole engine apart, or not. Remove the spark plug, try rocking the flywheel back and forth and watch...

Here's the service manual for that series engine....https://resources.kohler.com/power/kohler/enginesUS/pdf/tp_2339_d.pdf

If the leak is small, I would try this leak fixer, https://www.amazon.com/gp/product/B07D5M1TGJ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1. It is the only one I've used that will cure a cracked side wall. Price is decent, about the same as buying a tube. Only use 1\2 pouch depending on...

If 3\16" is the ID, just buy locally at auto parts, get fuel acceptable hose. Can be thin wall. If the engine doesn't run with no hose, I would try attaching a short length to the air cleaner and plug it. May be causing vacuum leak. If still doesn't run, try opening the gas cap. This is for...

Briggs are pretty simple: Fuel solenoid, if equipped (grey?) Ground the solenoid Usually Black to kill wire 3 amp stator has a Red with a diode to charge the battery and an orange for the head lites (Maybe Backwards) 10 amp should have two wires (yellow or white) to the regulator and a single...