Forest#2's latest activity

Here is the good inline spark tester. OREGON SPARK TESTER Repl Briggs 19051 19368 Pull a plug wire one at a time and listed, compare...

Hello PTmowerMec, In the video, that sounds like a coil breaking down issue. You would need 2 adjustable air gap spark testers between...

Hello PTmowermec, Even though you disconnected the coil kill wires, the anti-backfire still has the ability to shut off the fuel in the...

Couple tests: While it's running at low speed remove spark plug wire one at a time and compare the engine rpms drop. If removing one...

You asked: Who's Murphy? search: Murphy"s Law on-line

It happens. Murphy has woke up. You say grass is brown and dirty in your area. Must not be close to Oklahoma. If the grass is brown...

So your carb has the jet adjust on the front of the carb? If so that screw is for slow idle smooth engine idle adjust. I've seen some...

Hi Tommy, Without the compression release operating properly the engine compression is too high for the starter to effectively crank...

No I actually have another machine it's a Yard machine is the hydrostatic transmission but there's no reason why this one the celty 2000...

Just something to think about: (food for thought $ wise also_ 15 year old mower and still has same belts, pulleys, deck spindles, etc...

Good Luck to Ya. Not a fun project. Stay Safe when under the rig.

I suspected such. Your low idle issue right now is with the mechanical linkages and not the engines governor. First: You are going to...

As the clutch is depressed towards the front the drive belt slacks. As the clutch comes back the motion drive belt tension increases...

See pg 24 of your owners manual. Here is a link to download a owners manual for that rig. https://c.searspartsdirect.com/doc/L0912322...

If you can control the speed by moving the carb lever to touch the idle speed screw, you don't have a carb problem. When starting and...