Forest#2's latest activity
-
FForest#2 replied to the thread 422707-121401 sump gasket.You mentioned changing the carb. Not likely the carb with the symptoms you said. Them Briggs twins only used two types of carbs a 3...
-
FForest#2 replied to the thread 422707-121401 sump gasket.Couple questions: Can you hold the carb linkage at idle and get a slow idle? (I'm talking about holding the carb shaft against the idle...
-
FForest#2 reacted to ILENGINE's post in the thread Craftsman YTS 3000 with B&S 331877 1234 B1 emits blue smoke under load with
Like.
You are in the early stages of a blown head gasket. Blown head gasket between the cylinder wall and the push rod cavity is the second... -
FForest#2 replied to the thread Can't Find Tire Leak.OLD thread!!!!!!!!!!!!!
-
FForest#2 reacted to Auto Doc's's post in the thread Using cheap bulk pack fuses and the headaches they cause. with Like.
I have been an automotive, farm equipment and small engine technician most of my life. In that time, I cannot recall how many times I...
-
FForest#2 replied to the thread Adjust play in brake linkage rod.I'm just saying that those wheel standing, neck jerking, jack rabbit starts on some riding lawn mowers is the drive belt instantly...
-
FForest#2 reacted to ILENGINE's post in the thread This is the stuff that makes small shops look bad with Like.
Order a carb kit and accelerator pump kit for a Rehlko Command CV730 last week and just got around today to pulling the carb. and found...
-
FForest#2 replied to the thread Adjust play in brake linkage rod.I felt your pain about those neck jerking, wheel standing jack rabbit starts with several of the Lawn tractors models as the...
-
FForest#2 replied to the thread 422707-121401 sump gasket.Just to clarify when I remove springs from governor arm the engine should go to idle?? YES Just to clairfy. If it will not go to idle...
-
FForest#2 replied to the thread This is the stuff that makes small shops look bad.I've seen that same thing and more stuff just as bad on a really nice onan engine. (as one example of several) The wrong plugs had been...
-
FForest#2 reacted to Scrubcadet10's post in the thread This is the stuff that makes small shops look bad with Like.
Maybe they thought shorter plugs would work like a non fouler.... 😂😂
-
FForest#2 replied to the thread Scag Wildcat tries to start when key switch is in the run position?.Are you indicating it's now fixed??? Reason I ask is what you mention that you found with the fuel solenoid and PTO wiring does not...
-
FForest#2 replied to the thread Honda GCV 160 smokes.That Honda engine is normally a good long term engine with just little bit of TLC, especially changing the oil and replacing the oil...
-
FForest#2 replied to the thread Adjust play in brake linkage rod.???? I would probably search for a download a owners manual and parts list and review if the brake does not operate. Owners manuals...
-
FHow about a lesson on how a governor works?? The governor contained in the crankcase has two flyweights on it and the lever on the...