Recent content by FalconStig

First, thanks for the well wishes. Feeling much better. Well enough to pull the carb and run it through the ultrasonic cleaner once again. Ran some welding tips through all the orifices and found a plugged pilot jet. Cleaned it out, put it back together and reinstalled it. Runs like a champ...

Sorry no update yet. Sudden health issues. Will update when I know more.

Checked fuel by draining a pint into a bottle and looked for separation. None noted. Oil was actually about 6 oz. low (topped it off) and no smell of fuel. With clean fuel and clean fuel filter (I cut it open to inspect) I’d be surprised if it’s the carb but will pull it and disassemble...

Checked fuel by draining a pint into a bottle and looked for separation. None noted. Oil was actually about 6 oz. low (topped it off) and no smell of fuel. With clean fuel and clean fuel filter (I cut it open to inspect) I’d be surprised if it’s the carb but will pull it and disassemble...

After 40 minutes of use my Craftsman Riding Mower (engine in rear) suddenly started to run rough and stall. It would restart and die immediately. Left it while I finished lawn with my walk-behind. After 1/2 hour, started rider again but continued to run rough long enough to get back to the...

New member here! Just came into 2 Honda Mowers! A Commercial HRC216-AC HXA and an HRB215-FJ. Both run great. I understand newer models can use a twin blade set-up. Are either (or both) of these able to use the twin blades and is it worth the upgrade?