Recent content by eddie57

Not yet. Will take a look at it this week. Thank you.

I haven't taken the cover off yet, but I was just checking the Blade Control and Drive Control levers and when I squeeze the Blade Control lever the tension is tight, when I squeeze the lever for the Drive Control, it has a lot less tension. The belt was recently replaced and it was actually...

I will look into it. Thank you very much for your suggestions.

Ratchets are fine. Wheels are relatively new. I will check if the belt is slipping. Thank you.

I posted some pictures. The first picture includes the Drive Control (black color), the second picture is the front of the mower and I included the bottom of the mower as well. The cable for the drive control seems very loose. Maybe it's supposed to be that way. Thanks you.

I will look into it. Thanks

It's a new belt. Is there a way that when I set the self-propelled lever that it tightens the belt a little more? Thank you.

My Troy-Bilt self-propelled lawnmower doesn't seem to self propel like it used to. I recently changed the drive belt and that helped a little. When I am cutting the grass and make a turn I always lift the front of the lawnmower. Sometimes after I place the mower back on the grass the wheels...

Hi, the Fuel Tank Hose became detached from the fuel tank. How can I reattach the hose to the tank? I have attached a stock photo of the fuel tank. The hose that became unattached is the green colored hose. This tank was replaced 2 years ago and the trimmer has hardly been used. Thanks

Hi I finally tried using my lawnmower after having replaced the belt. It seems to work well on low grass, but when I try cutting the front yard, which has carpet grass, it seems like it doesn't work as well. It will seem to work and then when I make a 90 degree turn and lift the front of the...