Recent content by dicksonm

It sounds like you're dealing with a tricky issue on your Cub Cadet mower. Since both cylinders have spark and you've set the valve clearance correctly, there are a few things to check. First, inspect the carburetor and fuel delivery to the cylinder with 125 lbs of compression; it may not be...

It sounds like you're having a frustrating issue with your mower. Since the battery is testing at 12.7V and the solenoid is working, the problem might be with the starter itself or the connections. Check the battery terminals to ensure they're clean and tight; even a small amount of corrosion...

I am not an expert in SEO by any means, I only know a little about lawn and mowers, that is why I have joined here, to meet more people with my same passion and also learn about this, but my cousin has several websites and has hired more than once seo link services https://linkbuilding.website/...

It sounds like you're dealing with a frustrating issue with your Craftsman edger. Since you've already replaced the spark plug and carburetor, there are a few other things you can check. First, ensure that the fuel line is not clogged and that fuel is reaching the carburetor properly...

Yes, this is definitely a good forum to discuss maintenance and issues related to your Toro Out Front Z model 78478. There are many knowledgeable users who can offer advice and share their experiences. For maintenance, you might want to check for the owner’s manual or service guides specific to...

It sounds like your Toro Out Front Z model 78478 might be experiencing issues with the parking brake system or the traction drive. To diagnose the problem, I recommend checking the wiring and connections related to the parking brake and drive system, as a faulty switch or misalignment could...

When it comes to lawn mower blades, using OEM (Original Equipment Manufacturer) blades like the Toro OEM blades (112947) typically ensures better performance and durability, as they are designed specifically for your mower. While aftermarket blades can be significantly cheaper, their quality can...

It sounds like the fuel pump might be the issue if there’s very little gas getting to the filter, especially after you recently replaced the filter. Before replacing the pump, check for any blockages in the fuel line and ensure the fuel tank cap vent is clear, as a clogged vent can cause similar...

If the alternator is good but not charging, the issue could be with the **voltage regulator**, wiring connections, or a blown fuse. Start by checking the wiring for loose connections or corrosion, and make sure the belt driving the alternator is tight. If everything looks fine, test the voltage...

Since the Kohler engine was running perfectly before the ignition coil failed, it might be worth getting it fixed, especially now that the coils are available on eBay. If you are not interested in using the compactor and would rather sell the engine, repairing it could increase its value and...

If you still can't find the solution for this person here the same thing has happened to him, read the comments, maybe something they told him will work for you

The problem could be related to the fuel supply, especially if the mower only runs with the choke on. Check the carburetor to see if it is dirty or blocked, and consider changing the fuel filter even if it does not appear clogged. The fuel shut-off valve is usually between the tank and the...

Hi, it sounds like you're dealing with some pretty tough driving on your new Z254F right? good Apart from lowering the tire pressure, something you can try is (check the seat suspension) Some models have the option of adjusting the seat or even installing a suspension kit for greater comfort...

I honestly don't know why it is, I guess the best thing would always be to call a technician who knows about this type of things, maybe you need a repair right now.

Hello, no problem, you have a problem and the details are important so it was impossible for your message not to be long compared to your deduction of the problem is a huge possibility, since if they were connected none of that would happen, right?

If you can't find the serial number and you want to continue knowing what year, the only option I can think of, but it is something very dense, would be to search on Google for the model of the machine + some type of year that you think, for example 2001, if not It appears to search for the same...