Recent content by deck~dragger

They put 1/2 your username in there, capitalize on that, put up a billboard, Get your Carlstar tires from Startech !!

I found out the local Husqvarna store closed so ordered online. Spindles and blades came and are on the mower. I took a very small screwdriver and took the seal off of bearings [one side] and yes there was grease in there so reinstalled the seals, added a few pumps to the zerks and I suppose...

Here you go, pulled from another post: Use 587819701 Non Geaseable or 587820301 Greaseable spindles. Pulleys are the same so just use yours, may or may not need the spacers depending which bearings are used. Blades would be 594892801 (Hi Lift) or aftermarket of the same size, Five point star...

Interesting

I looked that first number up and the part of that spindle that sits below the deck is longer, to compensate for the blade cradle being absent. Thanks StarTech, headed to the store.

Product- 960430195 00 .........Serial - 02011 6A 005197 Hello LawnWorld ! Long time, no post. The YT46LS has the RapidReplace blade system. I have put up with that for 9 years and now the blade assembly is about shot [the cradle system for the blade for lack of the actual part name] I am not...

Yep, dragging the deck around again, finish mower.

Thats something to think about down the road with other trees, yep, that would solve the problem.

Good idea, Thanks !

Around 5 years ago, I cut 4 trees in the yard as close to the ground as I could. After weed trimming around them for years, was in a rush I suppose and thought I might try raising the deck, throttling down and easing over them. It worked, no tipping. I kept this up for a few mowings, then one...

That looks to be a garden or compact tractor, so a Massey Ferguson or AGCO dealer can help. Welcome to the forum from across the big pond.

Gusty winds here, happens every year, three days/nights of it this go around. I never had to start mowing until April until the last 6-7 years, needed to start in March. Winters used to be longer and a lot more snow, but I am not complaining a bit, I like the milder weather.

Yes, the Ezekiel prophesies and Revelation.

Thanks for the info. I went ahead and ordered the larger wheel and adapter, about $55 shipped. I am thinking it will fit, will see. Somewhere in my garage I have a spinner, will try to find it.

First I have heard about it. For several years now I have used KTech synthetic blend 10W-30 in the newer small engines. High quality ?