Recent content by clubairth

Thanks for the advice. Having trouble finding the part numbers needed? Any suggestions? We do want to replace all 3 items as you recommend. We got the correct hydro number up thread but the service manual I have has no part numbers in it? . . .

Wanted to come back for more advice? Got the hydro blown apart and found the problem causing the lock up? The brake setup was much different on this one than what we were expecting and it was not broken. Found destroyed springs in what I "think" is called the cylinder block? Here are the...

Understood and good to know. . . .

OK thanks again for checking. Our first attempt will be to take it apart looking for a possible broken brake pawl. If that's not it we will probably be buying a replacement hydro. Since it just locked up all of a sudden and the fluid looked fine. It must be a mechanical failure internal to the...

Thanks for your quick and expert reply. That is expensive but probably the best way to go for a home guy. Looking at the number I see ZL-GCEE-3K5A-1NXX? Maybe a typo SK5A? Sorry one more question? Do you have a preferred supplier? One you have dealt with before? . . .

Startech I am helping a friend and we are looking for a replacement ZT-3200 #ZL-GCEE-1K5A-1EXX. Right wheel motor for a old Hustler Mini-Z Model #06050615. Is a Hustler dealer the only place to order one? Your advice points to getting a new unit instead of rebuilding the old one? The mower is...